Blog Entry: 3/25/2006 2:23:10 PM
While my host says the permissions are now correct....its still trying to download the setup ASP file instead of executing it.
I really need to get this application working asap too. I noticed the purchasing page said that install came free.....so any help would reaallly be great.
re
, I have been working on this. 2Checkout is like the most confusing and worst payment processing company on the planet. There are things about that page I just don not understand as many times as I read through it.
Doesn't seem like this stuff is mandatory just yet. (I asked)
I should have something soon.
,
Editing the look of the login page.
In this version editing the look of the login page is very easy.
You can make this login page look exactly like you web site if you like.
You want to edit the "scripts/login_form_inc.asp" file.
It can be edited with any editor as long as the existing bits of server side code in it and the login form remain in tact.
The best thing to do is back it up before you start editing it.
Then if you goof it up you can revert back to the original.
If you edit this page with FrontPage enable the "show all" feature.
Its the little PIE sign in your icons. It will show the server side code as yellow things on the screen so you know where they are and can be careful not to delete them.
see screenshot
cwilliams38448.8132638889, Chris -
I am encountering a problem with items showing up. When I click on a category and then select an item to view I get
THIS ITEM IS NO LONGER ACTIVE
DO NOT CONTACT THIS USER AS THIS ITEM HAS BEEN TURNED OFF
OR THE USER HAS SOLD THE ITEM.
I have verified the item has the item_active check. For giggles, I even unchecked with the same results.
Thoughts?
, on that particular page check the session variables manually (not using the include)
that way you are keeping the login access checking to an absolute minimum, elminating any form processing from the login procedure, and keeping the upload script happy
like so
<%
If Not InStr(Session("Groups"),"*1*") Then
' do whatever
End If
%>
you could response.write something followed by a response.end
or you might even want to response.redirect them to some other page that using the "check_user_inc.asp" where they can log in
And if you are going to be using a free asp upload script use this one as it is probably the best pure code upload solution available as far as performance goes.
http://www.freeaspupload.net
, download the free version...
check out this tutorial...
http://support.cjwsoft.com/code/moreinfo169-1.htm
If your application can post to the page and provide all the form variables needed to log in it may work out for you..
You'll have to try it out... all the form variables needed are in that login form example.
Basically you'd be posting to a protected (.asp) page..
and providing the following for the most part.. how your app creates it post data is on your end...
<input type="hidden" name="Status" value="Checkem">
<input type="text" name="Username" value="Yourusername">
<input type="Password" name="Password" value="YourPassword">
As an alternate scenario...
Now, by default the "check_user_inc.asp" file is looking for posted form data... for security reasons it is not looking for querystring info..
If you change this bit of code in that file
from
Username = Replace(Request.Form("Username"),"'","''")
Password = Request.Form("Password")
to
Username = Replace(Request("Username"),"'","''")
Password = Request("Password")
It will then grab either form or querystring data...
Meaning you wouldn't necessary have to create a true post to the page with form data. You could just access the page via a querysting like so
http://www.mysite.com/somepage.asp?Status=Checkem&Userna me=Yourusername&Password=Yourpassword
Of course that introduces security risks as the username and password would be passed in plain text over the net
Another option is...
You can also make a copy of the "check_user_inc.asp" page called whatever with those modifications just to use in pages you need your little application to post to... thus reducing the security concerns a a bit as the rest of yoru site could still have its pages protected under the normal scenario.
I hope this answers your question... I havent really ever tried any of this but that is how I think it would work... , Hello,
Sorry, I do not have any good ideas on this one...
Domain Name Masking can cause issues with quite a few things.
cwilliams38366.3136342593, yes, PM me the encryption and cookie keys if you don't mind.
I can add it to my combinations that cause trouble.
it might help me to figure this problem out.
, 
Yes.
Now its OK
Thanks Christopher
, Hi,
I basically explained how I thought that might work here where I went over everything I could think of and suggested you download the free version and see if you could get it working
http://support.cjwsoft.com/code/moreinfo488-1.htm
The part about using the alternate scenario involving querystring info from a url.
I have never done anything like that and that is why I told you what I knew and suggested you try it with the free version...
, btw: who is this hosting company anyway ?
and did they give you access to a control panel that lets you manage your site ? sometimes that is where you manage those permissions if their interface supports it
lastly, are frontpage extensions installed in your web so it can be connected to via frontpage ?
, User Registration
The "users" folder allows users to sign themselves up and edit there accounts as well as retrieve lost passwords..
In the settings tab of the ASPProtect admin area there are options for which fields are used and which are mandatory when a user signs up. The only validation the system performs by default is checking for mandatory status. If you want to add more validation so reduce the chances of input errors that is up to you.
You can add additional server side validation by doing server side checks on the save pages... you can also make the field sizes larger in the database if you think you need to. You'll need to be good with ASP to do this.
Always backup your files before making changes to them so that you can revert back to a working copy if you mess something up.
, I'm all set - after thinking about your replies - i checked a bit more and changed the email component type -- thanks again for all your help.
, humm
expiration dates in the aspprotect system are not used at all when using paypal subscriptions.. all date handling is done on their end actually
and they of course send notices from their system to the user regarding their subscription and when it renews,cancels, etc etc
so I am pretty sure any errors with that would have more to do with the info you used for the subscription setup and possibly any paypal settings associated with it
its hard to say at this point
The smart thing to do I think.. would be to sign up someone using another PayPal account (your allowed 2)... and while doing it be very careful about the subscription setup data.. and then as soon as the subscription is created review all the info in the paypal system and see if the length of the subscription / expiration.. etc etc in the paypal system info looks right..
at least then you can begin to troubleshoot what is going on...
, SQL Server Database Information Mod
This mod is only for customers running SQL server. It is a new stored procedure and a new version of the "server_info.asp" file that will display information about your SQL database on the Server Info page.
Purchase Page
This is for Advanced SQL Users only that understand how to add a Stored Procedure to a SQL Database as well as assign permissions and what not.
To install this mod you should have access to SQL Enterprise Manager and Query Analyzer as well as be able to grant your SQL database user EXEC permissions on the new stored procedure. , I did everything mentioned here but it do not work ;(
, Everything is running fine.. I can read ads... reply to them. but when I click sign in or register.. I get a server error.
Any suggestions
Thank You
, OK, I figured out the problem. Not running ASP becasue the pages are not saved as ASP but rather HTM... OK so I am smart like a tractor but strong like an ox.
cwilliams38229.9128819444, Hi Chris,
When I run the physical map test this is what I get:
The Physical path to this virtual website is: \\NAWINFS04\home\users\web\b2623\rh.vickery2004
Will that work correctly without a drive letter specified?
Thanks 
Rhona
, Rather than bill customers through my PayPal account in $$$ can I get ASPProtect to send through the amount to PayPal in £ (pounds sterling)?
I am using PayPal (non-subscription) [paypal_signup]
Many thanks
Ian
, Sounds great, Sold!
Thanks Christopher!
, Thanks for that.
I have tried InStr("*2*",>"0") in the query design window but it does not return any members.
I have orded a Access Bible to help me in furture
, I am trying to understand how/where the "Log_Off_URL" variable is set
I have searched the forum for that string but don't get real good
results...I think the _'s are replaced with spaces for the search.
I am learning how to use the groups options and have modified some of
your example access level examples to test out group stuff. At the
bottom of the default.asp page I see a "LOG OFF SYSTEM" link that is
filled with a link stored in the Log_Off_URL variable and it looks
like that is being set back to the default.asp file somehow. So when
I click on it it just refreshes the page and appears to keep my user
logged in.
Seems like it should log out the user and redisplay the
login page. Is there a way to log totally off and have the login page
show up again? I am sure I am missing some obvious thing
somewhere...I can see where the Log_Off_URL variable is being created
in the config_inc.asp file but did'nt know where to look for more
info. Can you point me to an existing forum link?
Thanks!!
, This server is sitting in my den on a DSL circuit, so I don't have a hosting company. The install for Windows 2000 server is with default settings for all components installed.
I am not sure what you are referring to when you say:
"Does emailing work under the simplest scenario ? (directly from the users screen"
What user screen?
What settings are you referring to that I may have chosen?
, It seems that if a user attempts to access a page that is not in their access level or they do not have the group permission they are redirected to the login page. Re entering their ID generates an eror and they cannot go back to the pages they are alowed to access. Is there a way for them to simply be blocked and return to the previous page or to a defined page so they can continue using the site?
thankyou
, Dear Support Team
I have read and Installed your v8 banner software
exactly as explained on XP pro which contains other asp working app.
I have problems with the " Application " and " Session" in your scripts
things that make the iis fall dead.
also in the file asp _unlimited_config.asp
you have exlained that every thing must be kept without the "" marks.
well i get http 500 error cause of it.
Please advise
Thanks
Ran
, Banners no longer show up on my site ?
If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.
The web server must have crashed or lost power and now the application variables are in limbo/not working.
I have seen this happen 3 times. Twice on my own server when the power went out for 2 hours and once on a customers server.
Basically the application variable system gets all messed up because it was not shut down properlly.
The ways to possibly cure it are as follows.
Edit and save a banner in the system. Hopefully that gets things going again.
If not... keep reading for the more drastic cures..
Go to the command prompt on the server and type "iisreset"
Sometimes that is enough.
Reboot the server.
Sometimes that is enough.
Stop the web in the IIS console.
Sometimes that is enough.
Stop the individual processes for each web in iis
"you must really know what you doing and be very careful about doing this"
Remove and recreate new applications in IIS for the web in question.
And sometimes it just takes a combination of the things listed above and a few reboots. I don't know the best way to cure it but I do know why it happens and the steps listed above can get things back on track.
Again, this is because the server lost power or crashed as far as I know.
It was not allowed to shut down properly which sometimes happens.
You'll know things are ok again when you see your banners show up on your site.
cwilliams38295.0183101852, Is there somthing I need to change in the settings to get the hit count to update?, 1) Does everything, i.e. every user, every category, every product, etc., get stored in just one single database, or are there multiple databases at work and are linked to one another? I am asking because there is only one table in the DB, and it is the "Users" table. So I am presuming that there must be other databases that are linked to the DB. Is this correct?
2) Are user-level security permissions utilized in the sample Access DB that is shipped with the software? I am asking because we cannot seem to remove the "temp" password no matter what we try, and this is the only reason I can think of.
, Not the way it ships. You would have to add that functionality by editing the source code and database., We have been using ASP Protect for a while now and are big fans of the program. We received ASP Banner 8.2 with our puchase which we now have a need for. I went to put the files on our webpage, and doing nothing else other than locating the directory there, I noticed differences with how ASP Protect operates. We have customized it a bit and want to keep the 2 programs separate. the login screen for one showed up on the other, and some ASP Protect pages appeared altered so i immediately deleted ASP Banner. did I do something wrong, and how can i ensure the 2 programs work completely independant of each other? We can't risk braking what we're now using but would really like to add banner functionality to some of our pages. maybe an update to the program before we install? puchase new software? Thanks for your help-
, Well you can put a link on all your pages that links to the login page?
modify the code in the login page so the return page is members.aspx or
whatever you need and thats it?
I dont see your point? probably because I understand how the program works and your not 100% up to speed on how it works.
, I had a question about user registration and how it works, mainly because I am having a problem.
When a user registers, with the email verification setting, I am assuming that there is supposed to be a new record created in the USERS table in the database. What could cause this not to happen?
Actually, in testing further I found that with the setting at Auto, Manual, or email, the record is not added to the table. And, if I am logged in as admin, the Add User button does not do anything.
I can however edit and delete user records...
Hmmm, adding a Category yields the same thing. And loggin in as a non-admin user still displays some of the menu items for admin, but then gives a page can not be found error if you click on one (ie, approve).
This looks like a db issue to me, I will have to try this with access and on a test server...
Any thoughts?
- Jason
cwilliams38303.8507291667, it might also be a good idea for you to try a simple text file writing example like this on your server and see if it hangs as well
http://www.devasp.com/samples/writetofile.asp
for troubleshooting sake
this is sounding more and more like the filesystem object is blocked or disabled on your server
, again I will ask you what is the real error??
see the link above when I asked you the 1st time.
(I need the error details and line number.. etc etc)
and what kind of a server are you trying to run it on ?
you mention xp pro but in a confusing way ?
, That carrot doesn't really exist in the file, so I'm not sure.
I did download and place the ASPTEST file in www.drsweisberg.com/asptest and when I try to load the 2 pages it fails to load. I have another site on the same server and I uploaded the same exact set of files and the asp pages load. www.klarman.com/asptest
http://www.drsweisberg.com/asptest/server_info.asp
http://www.klarman.com/asptest/server_info.asp
This is how I set the connection:
ConnectionString = "DBQ=D:\clients\rklarman\klarman\asptest\_database\asptest.m db;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"
ConnectionString = "DBQ=D:\clients\rklarman\drsweisberg\asptest\_database\aspte st.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"
, let's try this... edit that page with a text editor like notepad...
Carefully replace any instance of "Cint" with "CDbl".. I may have missed some of those when testing the last time I edited the code.
, Hi. Chris. I'm not a programmer of any sorts, so I am not comfortable plugging in the changes you suggested and not knowing for sure if it will "break something somewhere else". If the programmer tells me "you have been warned", its a pretty good sign its a no win situation. If you don't know, theres no way i can know.
I saw in the code where you mentioned the changes. I don't see where it mentions the last name is required either, but the bottom line is it does require it it the actual new user form.
Thanks anyway Chris. I'll figure something out.
-john
, I am trying to set up ASP protect 6 and have a problem that when a new user registers their email is not transferred to the database.
I can see the rest of their entries both in the database and in the admin/edit form but not the email.
Any ideas?
,
I'm having another problem-hopefully it's a quick fix.
it tries to go to a page: default.aspx
Server Error in '/' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested Url: /default.aspx
When i log in as admin from the aspprotectadmin/default.aspx that works fine...
where should the user be sent when they log in? Am i supposed to specify that or is it automatic? Why isnt it working for me? I dont believe i changed any settings that correspond to that either
,
Timecard Entry: 3/25/2006 2:23:10 PM
radius down and back up, teched phone calls, Found Dr. Maresca, and he got someone to open the locked door., scheduled next softMLS meeting/coordinated conference room availability, to Erie, Pa, Contact Paul Haggett at Massena Chamber and prepare information to mail to him, Lunch, Floating Holiday, Lunch, travel back to office and unload, Biz Fair, Contacted top producer via phone and got them to email specs for interfacing our SoftMLS with their top connector module... worked on this for a while... going to be a bit more difficult than I thought., Yellow Pages, Switchboard, billing calls, callbacks, Lunch, tech support did callbacks and Radlogs also expired users... was pretty busy had many calls due to 5500-5000 line problems , lunch, Working on CostGuard information, E-mail, Putting together and setting up the computer to run Windows 98se and getting familiar with it. , Updating http://pcbundle.gisco.net/ site for new resellers and banks and a little clean up, Working with Randy to setup new MLS server, Travel and meeting with Tara Marzano to Vermont (230 miles), Helping Bill locate problem in his Soft Vendor project, Affordable autos preposal- sent to joe the onwer, answered phone, worked on referral coupons, cc decline report and letters, batched., Review Resumes, Checked Voice, emails - relayed messages.
Met with Efficient Networks., m2000.net e-mail server is down, see open incidents., Met w/Michele,
