Ahhh....yes, I always forget about the cache.  That's exactly what it was. 

 I had made modifications to the import_pics.asp file, because I added more fields to the db, and made the import folder path dynamic, but I seem to have forgotten to add in the response.expires=0

Once I added this back in it has stopped messing up.

What was happening was, it wasn't overwriting the files, nor were they too big, but you would click on one thumbnail in an album(category) and it would display a picture from a totally different category.  It seems browser cache was the culprit, however.

Thanks for the quick reply, great product tooo!!!

Hi Chris,

I tried changing using Notepad in the config_inc.asp

from:

If  Application("SERVER_SOFTWARE") = "" Then
 Application("SERVER_SOFTWARE") = Request.ServerVariables("SERVER_SOFTWARE")
End If

To

Application("SERVER_SOFTWARE") = "iis/6"

and the albums still do not show up under the categories

Rhona (rookie)

UPDATE:  read whole thread..
Version has been delayed




These are my personal notes on the new version of ASP Photo Gallery that should be out sometime in May/June 2004. Please ingore any typos.

This version may be more expensive than the current pro version as this is a major re-write and there will be a ton of new features.

Regardless, special pricing will be offerered to existing users.

If you see any features not listed that you think would be nice please post them here. We will of course consider them.

ASP Photo Gallery Version 4

------------------------------------------------------------ --------------------------------------------

Finished Improvements:

new setup page makes setting up the data connection easier than ever
it attempts to determine the possible data paths and makes suggestions for what to try
when you finally get the data connection working it gives you a link to the admin area of the application
so you can get started using the application

all database table names can be specified in the config_inc.asp file for advanced users that they may need
to change the table names in the database.. helpful for sql installation where one sql database must be
shared by many applications

new data folder is the only folder that needs permissions set
before multiple folders needed permissions
now everything can be put in this folder... database,logfiles,configuration files,picture upload folders...
eventually all cjwsoft applications will do this allowing multiple cjwsoft applications to use that same folder
therefore making it easier than ever to setup more applications without asking your host to set more permissions

new text based config file makes it easier to add new options to the program without making changes to
the database structure... therefore the need for the configuration table in the database has been eliminated
this also reduces system resources needed to load the config data for each page because it eliminates calls to the
database for config data

added voice effects for data connection page, intro users page, and settings page

made it so ratings color was an option (red or blue)

fixed minor bug that wasn't showing fixed category heights when that was selected and am image wasn't originally sized that way during initial upload

changed logfiles dates so they always show up in the proper order 09 vs 9

added config option to change bit query value to 1 or -1
default it to 1.... this is a technical thing

added the extra options currently in the config file to the settings page so people do not have to manually edit that
file any longer...

added new persits email option and authentication options to the settings page

added new CDOSYS emailing option

added support for dundas emailer

added support for ASPSMARTMAIL

fixed word filter so if it is empty it doesn't mess up
also make editing it part of the main settings

made email functions include file and edited all page that email to use it

added css/style sheet support and removed a lot of the old font tags

seperated the settings page into sections because it was too big and confusing

added ability for text watermarking when using the ASPImage component

made the picture upload error message no longer mention browsers that do not support picture uploading
as that is confusing people... and the problem is never that anymore

Made the ASPImage test page delete the bar graph before creating it so if it is already there they will
not think it is working

added crystal ball feature to admin users screen... shows additional user info when you hold the mouse over it

Made search function highlight search word in results.
Made the search function search the image description text files as well

Eliminated the guestbook directory as there was no need for the guestbook to be in it's own directory. This also simplified the menu.asp file as the guestbook section could be removed.

------------------------------------------------------------ --------------------------------------------

Possible Improvements:

eventually make new and much better directions/documentation... html based for multiple reasons

Eliminate the need for parent paths to be enabled on the web server.
(THIS MAY NOT BE POSSIBLE)
Many hosting companies disabled parent paths and will not enable them for their users.
On Windows 2003 Server Parent Paths are disabled by default.

make it so users ability to upload pics can be optionally disabled

possibly make some of the special functions in the extras folder built in to the admin area

Make the category picture uploader smarter because of the jpg gif issue when reuploading cat icons
A jpg loaded over a gif.. doesn't delete the old gif graphic and vice versa

Reduce number of ".asp" pages in general.

Use more functions for redundant tasks.

Optimize all instances of the old filefound function which is using more resources than are necessary

option.explicit the entire application and get all the variables dimmed once and for all

possibly incorporate the new category system I am working on which allows for unlimited categories and levels
also simplifies the heck out of the pages that call the categories

possibly add some cool image manipulation functions such as rotation for the various image components supported

possibly add the ability to move pictures around in an album. and maybe between albums
I must also remember to move the ratings and desc as well for that image.

possibly add the ability to make individual pictures require approval

possibly add the streaming image ability (asp page called from image tag) I came up with as an option for
people that can use it. this will better secure images in password protected albums and also possibly make
it so images can only be viewed from certain urls.. and maybe make an interface for a list of allowed urls

improve the .net support to also resize the larger images.. currently it does not

possibly add a feature to store 3 versions of images uploaded
thumbnail, medium res, and high res/original
this will appeal to professionals or people that may want to sell prints
storing a large version will be optional

possible support for multimedia content other than gif and jpg images

fix... url to link to..   problem on control pics page when both a jpg and a gif are present... which also relates to a another slight
bug that needs to be taken care of

make interface in admin to listen to installed midi files
and also to upload / delete them

possibly make per album guestbook... or call it something else like disussion or comments

add option to store the images orginal name in the images description area during upload
may be helpful to people that name their images in a somewhat descriptive way

change approval settings so they work on a per user basis
eliminate access levels from edit user screen and get rid of the level 4 stuff mentioned
possibly add a per user option for individual pic approval as well if I get that feature implemented

add support for the ibulc bulk upload client that I recently discovered
it is very cool

I have sent an registration email (as test) to both a yahoo account and also my own email server and in both cases I get the same issue, all else is working great. I am sure its somthing simple, perhaps I am over looking somthing else. the site url is www.rochestertek.us/asp/users/register.asp if this helps

Again thanks.

Hi - I am a recent user of your software. I administer it for the owner. I probably missed something in your forums somewhere - but I'd like to know how to stop the software from sending an "accept registration" e-mail (after they fill out the registration page) from going out so fast - usually within minutes.  I'd like to know how to defer the message for 24 hours, more or less, so that our company can go over the registration details and decide whether to allow the person registering to actually have access to our protected website pages.  The program is working very well and we are excited about it.  So far, no problems (knock on wood!).

Thanks so much for your help!

I have been having some display issues with the .NET version of ASPBanner.  I set the size of the image, and I set the size of the banner and there is still white space above and below the image.  I am not using a text link below the banner, so I have it set to blank.

Here is a link to my page. 

http://www.nababaseball.com

Two of the three banners in the rotation on the main page have non-white backgrounds so it's easy to see the issue I'm talking about.

Is there a way to tighten up the formatting so that the image fits onto the page in the size specified?

JDooley

I am trying to find out where I can enter the ttle for the application.

There is a variableor field called App_Name into which it would be good to insert a generic name. Can this be edited?

I have searched high and low but cannot find anything to do with it.

lets get back to using the forum and not the pm's  please only use the PM's for sensative information. its too hard for me to keep track of all of this as well as help everything else when I got an inbox full of pm's

Ok, so you say no paypal subscription info is being put in the database at all.

I know we have a bunch of people using the paypal subscription code with no issues so I know it works but obviously you got something wrong.

It could be a few things.

Did you enable IPN in the paypal system and put in a postback url like my directions say ?

Are you sure you are not getting paypal single payments and paypal subscriptions mixed up ?

Are the paypal links you made for paypal subscriptions in the correct format like are directions state ? That is critical and another example of something important that you have not shown me.

Did you populate all settings correctly for our paypal subscription code ?
This includes a correct and valid postback url because if that is not right paypal cant communicate with the aspprotect system and no info will get posted back from them at all.

You say your upgrade went well but if you did all all field names perfectly there could be issues with that.

There is just way too much for me to figure out under free support with the info you keep providing me.

I dont think we are going to get anywhere unless I go into your system and spend a considerable amount of time checking everything out. That is not something I do under normal support so if you are interested it is going to involve a fee paid via paypal. It's probably going to take me a while to check everything out and I need you to be 100% sure IPM is enabled in your PayPal account. If you are not sure how to turn it on search their help system as they have plenty of documentation on the process.

whether you use SSL or not really does not effect aspprotect in any way

I say, the smart thing to do there is too not start them off at a http:// url

one way to do it is put a simple ASP redirect on that default page and send them to an SSL version of the page instead...

http://www.powerasp.com/content/code-snippets/redirects.asp

another way would be not start them off on a protected page right off the bat and offer links to the the protected area...

in my opinion thats pretty odd to be starting them off on a protected page anyway
SLL maybe, but protected right from the time they hit the default page of the site.. thats just odd.. usually you want o say a little something about the site your at and then link people to protected areas or give them a login form which posts to a protected area.


Regardless if you always want users at your site under https:// you should have code on every single page in your site checking the url info at every page load. Then if someone ever hits a page and is not using the https://  you can do something about it like redirect them to the SSL home poge or redirect to that same page but with the https:// in the url..

Okay, here's the problem.  The out of the box sql script creates a catalog called aspphotogallery and a user id aspphotogalleryuser.

The out of the box GalleryConnectionString tries to access a catalog called aspgallery and a user id aspgallery

'*** GalleryConnectionString = "Provider=sqloledb;Data Source=p600laptop;Initial Catalog=aspgallery;User Id=aspgallery;Password=temp;"

I see the readme.txt has been corrected but the line in dataconn_inc.asp still needs to be changed.

SQL Server Datareader Datawriter Permissions..

here is a screenshot that shows how to set datareader and datawriter permissions on a database using "SQL Enterprise Manager"

In this example we are making sure the aspbanneruser has those permissions on the aspbanner database in the SQL Server

It's custimization work. and just not something I can support.
Basically it is basic ASP/Database work.

Something you kind of need to figure out on your own. It's not difficult work for a good asp coder but there is no easy way and it is time comsuming.

I wouldn't use the custom fields though. I would make your own.
It's simpler that way.

Chris-

A general question - Can you have multiple instance of the gallery on the same server? 

again I will ask you what is the real error??

see the link above when I asked you the 1st time.
(I need the error details and line number.. etc etc)

and what kind of a server are you trying to run it on ?
you mention xp pro but in a confusing way ?

SQL Server Datareader Datawriter Permissions..

here is a screenshot that shows how to set datareader and datawriter permissions on an aspbanner database using "SQL Enterprise Manager"

In this example we are making sure the aspbanneruser has those permissions on the aspbanner table in the database

in that file "upload_post.asp"

change

<%
If Session("Admin") <> "True"
 Response.End
End If
%>

to

<%
If Session("Admin") <> "True" Then
 Response.End
End If
%>

It's real easy actually if ya sniff around the source code.
ASP is so easy to (work with/edit) even if you dont know any code.


edit   "save.asp" with a text editor

change

If Request("First_Name") = "" Then
  ErrorMessage = ErrorMessage & Server.URLEncode("You must enter a First Name.\n\n")
End If

to

If Request("Company_Name") = "" Then
  ErrorMessage = ErrorMessage & Server.URLEncode("You must enter a Company Name.\n\n")
End If


From looking at that save code I dont see where Last_Name was required. The only name I saw required was a 1st name.

Also.. making the First_Name not required may break something somwhere else. I dont think it will but it might. You are warned.

yup. that is correct... they can't log in so they can't see any pages you protect

its the nature of forms based authetication

I have imported like 50,000 users into an access database when testing... it took like 4-5 minutes but worked..

course it really all depends on the setup how many you can get away with

something must still be wrong

have you tried just importing 1 or 2 users for troubleshooting sake ?

I would also recommend that after any timeout you reboot the server or at the very least do an "iisreset" to get things back to normal

I getting a strange error with ASPProtect.

 Microsoft OLE DB Provider for SQL Server error '80040e14'

Unclosed quotation mark before the character string '¾_^Ö'.

/aspprotect/check_user_inc.asp, line 114

If I check the database directly "¾_^Ö" is the exact string for the password.

Any Ideas

Or at least I think so.  I have been trying to get this software to work so I can see if it meets our needs for an upgrade purchare. Here is my error.

Microsoft JET Database Engine error '80040e10'

No value given for one or more required parameters.

/aspprotect/scripts/populate_config_variables_inc.asp, line 15

My provider says that the problem is NOT on there end, that it is a problem with the code.  I think that it is a database connection problem.  Can you please help.  Below is my connection string based on what the setup page directed me to do:

ConnectionString = "data source=\\NAWINFS03\home\users\web\b1347\rh.957theride\asppro tect\data\database\ASPProtect_access2002.mdb; Provider=Microsoft.Jet.OLEDB.4.0;Jet OLEDB:Database Password=temp"

When I first set up the program I got this error:

Provider error '8000ffff'
Catastrophic failure
/aspprotect/scripts/populate_config_variables_inc.asp, line 11

Once again, the looked into it and said the permissions were fine and that the code was most likely bad.  But then the errror changed to the one that I first listed.  Which is the one I am currently getting. 

BTW here is the page address

http://www.957theride.com/aspprotect/password_admin/get_me_i n.asp

Thank you!

I have activated both activity and log files. The directories exist on my server and don't give any errors.

When I check the activity tab, some times there are a number of items in it.  Other times, there is only my login info.  From what I can see, it is supposed to show the last 50 items of activity at all times.  Am I missing something?

Also, when I click on the log file tab, there is no file or information to see.  Is there something I need to do beyond activating it in the settings area and making sure the directory has write permissions?

Thanks.

I believe I'm having trouble with Domain masking in that it appears to affect the ASP Photo Gallery login screen.

My address is forwarded and masked by my domain "company" (in this case: Godaddy.com). It is forwarded to a Win2000 Server running at my static home IP.

From outside of my network, the website appears to work fine...even the default.asp page works to the point of the login page. After entering a login and password - you hit the login button and the page simply reloads only with all of the header and footer information removed.

I found that by eliminating the domain masking feature at the domain company, the problem gets eliminated and the entrie site works fine.

Has anyone else run into this problem? I'm guessing it's the way the domain name is held in the browser cache but I'm not sure how to resolve it so that the ASPPhotoGallery scripts and pointers work correctly.

Eric

SQL Database Creation (NEW INSTALL)

If you are creating a new database do so using SQL enterprise manager.
Create a new database called whatever you like and keep all the default settings. If using an existing sql database skip that step.

Now open up SQL Query Analyzer

unzip the following sql script and open it in query analyser.
2005-02-20_132116_aspprotect_v7_sql_script.zip

VERY IMPORTANT
On the drop down box at the top right make sure your intended database is selected. Otherwise your changes may effect the wrong database in your SQL server.

Then load the script  into the Query Analyzer.  Click the green play button at the top. If everything goes well the response should read something like this.

******************************************************
(1 row(s) affected)
******************************************************

If so the tables have been created in your existing database.

Now make sure an existing or new SQL user has (public / datareader / datawriter) permissions for the new tables. You will be referencing this user in the asp code connection string so this user must be set up correctly. You may need your SQL server admins or hosting company to help you on this step as you may not have access to do this. You may not need to create a user and set permissions as the sql user you were logged in as to use query analyzer may by default get the correct permissions on anything you create.

Regardless, as you can see from this screenshot I made a SQL user called "aspprotectuser" and proceeded to set the permissions for that user. Under database access giving him (public,datareader, and datewriter permissions).


Now, in the ASP files provided with ASPProtect edit "dataconn_inc.asp" with a text editor and modify the connection string info. Be sure to change the info to match your server,username, and password.

Below is an example of valid connection string.

ConnectionString = "Provider=sqloledb;Data Source=poseidon;Initial Catalog=aspprotect;User Id=aspprotectuser;Password=temp;"

The  "Data Source" setting is either the Network Name for the SQL Server or the IP Address. For local servers you can sometimes use an IP of "127.0.0.1" or the name of the local server.

"Initial Catalog" is the name of your database.

Now, in the ASP files provided with ASPProtect edit "dataconn_inc.asp" with a text editor and set the DatabaseType variable to SQL like so.

DatabaseType = "SQL"

all I can say is try other things...  like

mail.yoursite.com

or

smtp.yoursite.com

etc etc etc

replacing yoursite with the name of your domain of course


the settings for sending email via ASP are no different then the settings you would use in outlook or something... except sometimes on the server level localhost works as the email server because they set it up to allow that

and of course those 3rd party emailing components need to actually be installed on the server

I just purchased the software and it looks great however, I have been fighting for 4 hours trying to get a protected page to do what it is supposed to.

I was trying the examples you provided and they worked fine, then I would use the code at the top of my pages with no luck.

When I installed the software, I used an FTP package as I have found lately that anything with a database gets all messed up when I publish with FP.

On a whim, I took the page I was publishing in FP and published the same page with my FTP program.  It worked!  What I can't figure out is what FP does to the files to screw them up so they won't function.  Is there a setting in FP that I have to change to get it to work?  The files look the same, but they are different sizes when I overwrite them with FTP.

Any ideas?  I don't want to have to publish my entire site with FTP as it is a FP template site.

Thanks,

Dave

Greetings:

I am doing the initial set-up and have run into a problem. Everything has gone smoothly up to and including pulling up the get_me_in.asp page. When I enter the "PasswordEncryptionKey", nothing happens. The page just sits there without doing anything and the browser says it's opening the page, but never does. I have tried entering the value with and without the double-quotes. The value is the correct one from the config_inc.asp file. I did a copy paste from the file twice to insure I transferred it correctly.

I am running Windows 2000 server.

What now?

Warren

sorry your having so much trouble. A good host is a must.

Yes, that is most likely permissions related.
http://support.cjwsoft.com/code/moreinfo27-1.htm

You may want to read over my article on how permissions are set. It will give you a very good understanding of the process and may help yo when dealing with your hosting company.

http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

there is also an xp pro version of the article for people doing locl development and running iis on their xp box
http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

Hello,

Sorry
No, there is not.

not the way the code ships.. The program keeps tracks of everything by the way it ranames files. The system has been tested to work well with as many as 10,000 images files. Any more than that and you need something a little more serious meant for that amount of images.

You could certainly modify it do work that way if you are good with source code. There are actually as many drawbacks as doing doing it that way as there are advantages.
Take Care

Can we get access to the source project files for ASPProtect.net since we'd like to put in some of our own branding on the pages and not everything can be done in HTML.

Thanks