need more info..

are you using aspimage to resize images and make true thumbnails..
(because if you have it turned on and it isnt actually installed on the server you will get broken thumbnails.)

what kind of images are you using ? gif or jpegs

are you uploading images over existing images ?

really need to know exactly what to do to reproduce the situation from scratch and then I can give you a better answer ??

ok, I am home.. missed flight.. just got home an hour ago.

lets see.. I really need more info...

For starters are you using the delayed stats feature ? that is expirmental and could cause that problem

dsn-less is the way to go..
http://support.cjwsoft.com/code/moreinfo9-2.htm

you also need to use newer versions of the database as the odbc drivers on the server are sometimes very new and no longer work with access 97 databases

I really do not know.. maybe it is a conflict with something else..

I run many instances of aspbanner on my servers and I have every item to log enabled for my iis log files... my stats server software which reads those log files (livestats and smarterstats) have never reported any 404 errors related to (aspbanner/those images)...

I do not know what is happening in your situation..

sorry.

I had not rebooted after installing the Jet driver updates, so I tried that and the asptest page worked fine, and said that all the tests were successful and that the data connection was setup correctly. I then installed aspprotect again, but with the same results. I cannot log-in from the get_me_in.asp page. It still says that it is opening the page, but does not respons for an indefinite period. The asptest page is in the same directory.

I have looked for alternate databases for this product on your site, but I cannot seem to find them.

as I look at your installation more I notice that you are using MSSQl as the database type.

chances are that is the source of these problems. Fields in the sql database are most likely not all set correctly

it is very important that the sql tables and fields are set up exactly as described and that the sql script we provide runs without error

http://support.cjwsoft.com/code/moreinfo160-1.htm

if you create the sql database other than the way we tell you to or the sql script doesn't do its job setting all the field types/constraints/primary keys/etc..... for some reason .. then weird things like this can happen

at this time this is my best guess as to what is going on

I would examing the sql script we provide and compare the information set in it for each field and table to your existing SQL database to see if everything got set correctly.. I would start by checking these fields 1st of all as they are very important.... (username,password,expiration_date,admin,active)

in the meantime testing the ASPProtect system with an Access database will prove that all the ASP code is working as it is supposed to if you are interested in doing that

I did all that you sugessted and all failed, you  said "I did a sign up.. your verify URL is not saved/set in the application variables. is this somthing I can change manually?  below are the steps I performed......

1 - made sure the web is it's own application in IIS

2 - Reset IIS in command promt

3 - Restarted the server, the only thing is I have not waited perhaps long enough for it to kick in. but it should have with the restart.

I am running windows 2003 on the front end with wondows 2003 and Exchange 2003 on the back end, is there anything else that may be causing this issure?

Thank you!

Matt...

how about translating the error to english..

Looks to me off hand that it would have something to do with the SQL server itself not being run in an english lcid/format and causing some sort of date issue.

I would also suggest you start off with a brand new blank SQL ASPBanner database and make sure that works before you attemp t to import any data into it.

thats a new one... I need some sort of error to go on..

No error ever ? It must eventually show something ?

You have old code I think.

It's probably because his password used with your encryption key by chance creates a single quote and messes up the database query

A notice went out about this. I will PM you the latest download with the updated files.

Installed latest verison  Doesn't seem to have corrected problem.  Still with same message.  I wonder if deleting this user and putting him back in might help.  I have not however tried any other user names and passwords.

you not seeing the real error

http://support.cjwsoft.com/forum/forum_posts.asp?TID=11& PN=1

While attempting the database connection test, I receive the following error:

Server Error in '/' Application.

---

Security Exception

Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file.

Exception Details: System.Security.SecurityException: Security error.

Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Stack Trace:

[SecurityException: Security error.] aspprotectnet.DBConnectTest.Page_Load(Object sender, EventArgs e) +0 System.Web.UI.Control.OnLoad(EventArgs e) +67 System.Web.UI.Control.LoadRecursive() +35 System.Web.UI.Page.ProcessRequestMain() +2112 System.Web.UI.Page.ProcessRequest() +218 System.Web.UI.Page.ProcessRequest(HttpContext context) +18 System.Web.CallHandlerExecutionStep.System.Web.HttpApplicati on+IExecutionStep.Execute() +179 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +87

lets get back to using the forum and not the pm's  please only use the PM's for sensative information. its too hard for me to keep track of all of this as well as help everything else when I got an inbox full of pm's

Ok, so you say no paypal subscription info is being put in the database at all.

I know we have a bunch of people using the paypal subscription code with no issues so I know it works but obviously you got something wrong.

It could be a few things.

Did you enable IPN in the paypal system and put in a postback url like my directions say ?

Are you sure you are not getting paypal single payments and paypal subscriptions mixed up ?

Are the paypal links you made for paypal subscriptions in the correct format like are directions state ? That is critical and another example of something important that you have not shown me.

Did you populate all settings correctly for our paypal subscription code ?
This includes a correct and valid postback url because if that is not right paypal cant communicate with the aspprotect system and no info will get posted back from them at all.

You say your upgrade went well but if you did all all field names perfectly there could be issues with that.

There is just way too much for me to figure out under free support with the info you keep providing me.

I dont think we are going to get anywhere unless I go into your system and spend a considerable amount of time checking everything out. That is not something I do under normal support so if you are interested it is going to involve a fee paid via paypal. It's probably going to take me a while to check everything out and I need you to be 100% sure IPM is enabled in your PayPal account. If you are not sure how to turn it on search their help system as they have plenty of documentation on the process.

LOL

The only major usability issue I've found to date is multi-zone banners. Cloning is helpful to a point, but then if you have a change to that banner, you have to make the change 6 times or what have you. I think, even at the expense of speed, multi-zone capability for a single banner would be excellent addition. Of course, that supposes I haven't just missed it and it's already there.

Excellent

While my host says the permissions are now correct....its still trying to download the setup ASP file instead of executing it.

I really need to get this application working asap too.  I noticed the purchasing page said that install came free.....so any help would reaallly be great.

re

how you connecting... lets see the connection string...

could be permissions related too.. if they are not set correctly
(always give them to the folder, never just the mdb file)

Some of this might help...

http://support.cjwsoft.com/code/moreinfo11-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/moreinfo56-1.htm

you may want to download some of the different versions of the access database from the support area and try connecting to them as you may have older odbc drivers on the server

You may also want to try to get ASPTest from our website working before you go any further

Glad it is working.. for anyone reading this the customer bascially did this
http://support.cjwsoft.com/forum/forum_posts.asp?TID=36& PN=1

That being said asp photo gallery actually has a few more places that send email that you going to need to modify as well. Off hand the reply to album, admin massemail, admin send email,and postcard features come to mind possibly as 3 of them.

using a multiple file search and replace utility like ReplaceEm would be the easy way to do all of this in one step and find all the instances

http://www.orbit.org/replace/

Greetings:

I am doing the initial set-up and have run into a problem. Everything has gone smoothly up to and including pulling up the get_me_in.asp page. When I enter the "PasswordEncryptionKey", nothing happens. The page just sits there without doing anything and the browser says it's opening the page, but never does. I have tried entering the value with and without the double-quotes. The value is the correct one from the config_inc.asp file. I did a copy paste from the file twice to insure I transferred it correctly.

I am running Windows 2000 server.

What now?

Warren

I would kile to see more support for the groups function:

1. on the password_admin/default.asp page have a coulmn listing groups

2. ability to change groups in bulk eg change the expiry date for all group x members

Cheers

A question.  Does this apply to all areas of the application.  I have recently uploaded 50 photes.  But when I look at the site from the url, I have X where the picture should be.  Now, if I look at it though the localhost, I see the pictures perfectly.

Right,  I've done that.  My concern is that it will time out again while I'm trying to import the file.

The import/export manager does not show up under the users tab when I log in normally.  I have to pull up the page in frontpage and then preview it a browser to get it to show.

If I also password protect the pricelist pages then someone will have to login twice.

nobody should have to log in twice... ?

session variables keep track of access... once your in - your in and you can browse to and from any password protected pages you like

If it is making you log in each time then cookies are most likely disabled.. session variables requires cookies being on to work.. cookies being on  is a requirement of aspprotect and is how Formed Based Authentication works..

let me know if that is the issue there...

you shouldnt have to be logging in more than once per session

Thats the whole point of the application...

Just having the database with members does not protect the page.  You need to add the appropriate code to every page you want to restrict access to.

You need to click on the Groups tab in Admin. 
Click on Generate PW protection code. 
Click on the basic button if you don't want to include levels or groups or choose a level or group(s) and click the appropriate button. 
Paste the code that's generated  into the top of an ASP page in code view.

Is that what you're looking for? 

Michelle

Our login works great, variables even help determine menu options.  When user logs on, however, it opens in a new page.  Is there a setting somewhere that sets whether you can open in a new or existing page?

Also, when you log off

User Information

After a user logs in there are variables that you can always access.
They can be used to check various things or to display information
dynamically based on who has logged into the system.

   Session("PasswordAccess")
   Session("Access_Level")
   Session("Admin")
   Session("Active")
   Session("Expiration_Date")
   Session("User_ID")
   Session("Groups")
   Session("Redirection_URL")
   Session("Password")
   Session("Username")
   Session("First_Name")
   Session("Last_Name")
   Session("Company_Name")
   Session("Email")
   Session("Address")
   Session("City")
   Session("State_Province")
   Session("Zipcode_Postal_Code")
   Session("Phone")
   Session("Custom1")
   Session("Custom2")
   Session("Custom3")
   Session("Custom4")
   Session("Custom5")
   Session("Custom6")

You can display them on a page at any time using Response.Write like so

<% Response.Write(Session("FIRST_NAME")) %>

or like this

<% = Session("LAST_NAME") %>