you actually dont touch any of those
UploadDirectory = CmdGetConfiguration("UploadDirectory")
They get set from the config table in the database which gets edited in the admin area.

so...

I am talking about the settings area in the admin area of the applicaton.
Every setting there is descibed in detail. You get there and change serttings there via the web browser and by logging in as the admin.

Log in to the online demo as admin and check out the settings area if you are confused.
http://www.aspphotogallery.com/demo_pro.asp

I dont know about your error on line 6 when uploading..

as far as the manaully edited import file not working I would really need to see it. There has to be somethin wrong with it's format.

I really need more information and possibly acess to the system to do some troubleshooting...

This is anot a feature anyone has ever had an issue like this with.

<compilation defaultLanguage="vb" debug="false" />

change it to this

<compilation defaultLanguage="vb" debug="true" />

When you run the code in a production environment change it back though

More Info
http://support.microsoft.com/default.aspx?scid=kb;EN-US;3061 56

that wont work the way you did it because groups are not stored like like.

groups are stored "*1*"
or "*1*,*9,*"

so if you test for them you must do so using the InStr function of vbscript

example:

If InStr(Session("Groups"),"*1*") Then
    ' do whatever
End If

also.. as for the session variable
it should be    Session("Groups")

And in Version 6.... (its all ready to go in version 7) that session variable must be saved in the check_user_inc.asp file near where all the others are saved. If it is not there by default "I dont remember if it is or not" you have to add it like so near where all the others are saved

Session("Groups") = CmdCheckUser("Groups")

If you are wondering if it is being saved correctly you can always response.write out the Session("Groups") to see if it holds a value

I have a user who is trying to login. However, I am getting a error that I can't seem to find.
Username: executive.barcheski
Password: executive@amcpc.com

Encrypted Password: �?=�`م�

Error on check_user_inc.asp line 114

If (Request.Cookies("PASSWORDSYSTEMCOOKIE")("KEEPMESIGNEDIN") = "True") And (Request.Cookies("PASSWORDSYSTEMCOOKIE")("COOKIE_USERNAME") <> "") And KeepSignedInOption And Status <> "Checkem" Then
CheckUserSQL = "SELECT " & tbl_label_users & ".* FROM " & tbl_label_users & " WHERE (Username = '" & RC4(Request.Cookies("PASSWORDSYSTEMCOOKIE")("COOKIE_USERNAME "), CookieEncryptionKey) & "') And (Password = '" & Replace(RC4(RC4(Request.Cookies("PASSWORDSYSTEMCOOKIE")("COO KIE_PASSWORD"), CookieEncryptionKey), PasswordEncryptionKey),"'","''") & "')"
Else
CheckUserSQL = "SELECT " & tbl_label_users & ".* FROM " & tbl_label_users & " WHERE (Username = '" & Username & "') AND (Password = '" & Replace(RC4(Password, PasswordEncryptionKey),"'","''") & "')"
End If

CmdCheckUser.Open CheckUserSQL, ConnPasswords

error received: unclosed quote after '�?=�

Any ideas

Jason Johnson

you summed it up perfectly... everything you said really

As for the banner software custimizations.. you could just make another folder with a modified admin area (little tweaks here and there so the person logged in only controls their own banners) You'd probably want to add an approval process so nothing they did went live unless you really really trust them. That wouldn't be that hard either.

I always planned to do it someday but I just never have time.

so, on control_pics.asp where you see

<% =TempDesc %>

you could try doing this instead

<% =Replace(TempDesc,"&nbsp","") %>

i took another look at the file, and realized that when i was looking at the data structure i had confused "banner_image_URL" with "banner_link_URL". i lengthened the latter, and now all is good.

sorry for the false alarm, and thanks for a very-to-work-with product.

Understood.... can you point me to a place where there are other methods of calling banners?  Do you mean not use Flash?  I am new to this and will need some pushing over the cliff!

Thanks

Dave

I will actually explain how to set access_levels and/or groups...

in "users/add_new_account.asp"

It's not working because i guess im copying the viewstate also...and it comes up

Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.

Ok, so I checked to see if ASP is running on the server and it is.  then I added code to the top of a page and this is what i can see when 'view Source' on the web browser:

<%@ LANGUAGE="VBSCRIPT" %>

<!-- Begin ASPProtect Code -->
<!-- Groups with access to this page. ( * Admins * ) -->
<% GROUPACCESS = "4" %>
<! #INCLUDE FILE="check_user_inc.asp">
<!-- End ASPProtect Code -->

<html>
<head>
<title>TeamManagers</title>

Yet I get no challenage for a password and no error message!

1st: try it with a normal dsn-less connection like we show in the example.. dont use that OLEDB.4.0 connection string.. connecting like that can cause a lot of problems and is not as great as everyone thinks it is and it can sometimes be difficult to get it working when the database has a password set on it

For the sake of troubleshooting just connect like so: (fixing the path of course)

ConnectionString = "DBQ=C:\Inetpub\wwwroot\aspprotect\data\database\ASPProtect_ access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

ASPProtect will generate the actual connection string you should use when you run this page

http://www.mysite.com/data/setup_info.asp

Replacing the part in blue with your website info.


2nd: any IIS server setup to have the access database over the network path like that has a poor setup... and that can cause all sorts of problems as well, access is not designed to run over the network like that.. for more on that read this thread -  Start 5 posts down
http://support.cjwsoft.com/code/code_info.asp?TID=479&KW =OLEDB%2E4%2E0

3rd: If the app does not run using the connection string like I say to use then the problem is 100% on their end and is either related to permissions or the fact they are keeping the access database on a network path which is BAD BAD BAD... no quality host that knew what they are doing would set it up that way.. ultimately you don't want to host asp with a place that has a setup like that

4th: If you want to try some other stuff out we have a free guestbook, asptest, and a free version of aspbanner you can try out as well... www.cjwsoft.com

5th: If you need a quality asp host that knows what they are doing and offers great asp support www.alentus.com is the place

6th: Your right, it is not the code, its the data connection

so you are using the subscriptions signup directory right ?
"paypal_signup2" ?

1st.. I would check that the xml parser is working.

It is required for making the post back to paypal.
It is installed on windows 2000 and 2003 and XP by default.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=134& ; ; ; ; ; ;PN=1


Then I would check the actual form page to paypal to make sure it is generating a valid IPN url as a hidden form value.  It's the payment page you actually click on that actually takes you to paypal. For the subscription signup system that page is called "paypal1.asp"


You'll want to go through the process starting with the default.asp of the signup folder untill you get to that page. Then you want to look at the html source of that page in Internet Explorer. Your looking for something like this in the source code and you want to make sure it is valid.

<input type="hidden" name="notify_url" value=http://www.mysite.com/aspprotect/paypal_sub_signup/ipn.asp>

It also has to a url on the internet that paypals server can see. It can not be a local url for your machine. Also: If it is not valid we can try hard coding it.


If all of these things are good I'll have to take a look. I have some text file logging I can do when paypal hits your IPN url that can tell us if it is actually hitting that page like it is supposed to. And I can test the system for you by making some 1 cent payments using my own paypal account until we find out what is going wrong.

These are 4 valid examples of calling a flash movie.

The more simple examples may cause problems for people that don't have the flash plugin installed. I really do not know as I am no flash expert. All these work fine for me. Of course I have the latest flash plugin installed. Perhaps some of you can shed some light in this. The 3rd and 4rth examples are obviously only slightly different and mention different versions of flash as far as downloading the plugin goes.

<EMBED src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" WIDTH="468" HEIGHT="60">

<object width="120" height="22">
<param name="movie" value=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf">
<embed src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" width="468" height="60">
</embed>
</object>

<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase=" http://download.macromedia.com/pub/shockwave/cabs/flash/swfl ash.cab#version=6,0,40,0"WIDTH="468 " HEIGHT="60" id="myMovieName">
<PARAM NAME=movie VALUE=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf">
<PARAM NAME=quality VALUE=high>
<PARAM NAME=bgcolor VALUE=#FFFFFF>
<EMBED src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" quality=high bgcolor=#FFFFFF WIDTH="468" HEIGHT="60" NAME="mybannername" ALIGN="" TYPE="application/x-shockwave-flash" PLUGINSPAGE="http://www.macromedia.com/go/getflashplayer">
</EMBED>
</OBJECT>

<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase=" http://active.macromedia.com/flash2/cabs/swflash.cab#version =4,0,0,0" ID=banner WIDTH="468" HEIGHT="60">
 <PARAM NAME=movie VALUE=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf">
 <PARAM NAME=quality VALUE=high>
 <PARAM NAME=bgcolor VALUE=#FFFFFF>
 <embed src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" quality="high" bgcolor="#3CBDCD" WIDTH="468" HEIGHT="60" TYPE="application/x-shockwave-flash" PLUGINSPAGE=" http://www.macromedia.com/shockwave/download/index.cgi?P1_Pr od_Version=ShockwaveFlash">
</OBJECT>

Hi all

User activity screen shows history of logged-in users.

Is it possible to view only those users that are currently logged in ? not the all users that have logged in previously

thanks in advance

ConnectionString = "DBQ=C:\TradersReportsCom\aspprotect\data\database\ASPProtec t_access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

I have already set the folder permissions as indicated in the documentation.

Encountered another issue.  When entering a user name correct but the wrong password get the following error:

Microsoft OLE DB Provider for ODBC Drivers error '80040e14'

[Microsoft][ODBC Microsoft Access Driver] Syntax error in string in query expression '(Username = 'ROBERT') AND (Password = 'Z�$'.

/check_user_inc.asp, line 115

Did I do something else wrong?!

Thanks

Christopher,

Thanks for the reply. I think I've found my problem, but can't test until later in the evening as it is on a live site.

Darrell

Okay, this also shows at the bottom of the import/export page

I've got the IUSR account with modify permissions on this data folder as well.  Is the "this directory needs change permission" line just a general reminder?

Files are being stored in "D:\missourirealtor.org\members\aspprotect\data\export\\"

This directory needs change permissions for the anonymouse webserver account.
Those permissions can only be set by your hosting company.
These features will not work without those permissions being set.

Yes, I was referring to ASP Protect.

I had about a dozen people access the same account, but it is highly unlikely that they would all try at the same time (unless there were several hundred people who had access). Having an enhanced login abuse would be nice.

I just installed ASPProtect on my site. The instructions were definately on the target. Very very good instructions.

But... Isn't there always a but ???

I needed to setup my site with MS SQL and it is hosted so I don't have Enterprise Manager. I tried the web based Enterprise Manager and any other one I could find. But, I kept getting errors when trying to use the SQL Script.

I finally had to go back to my work where we do have the licenses and get an SQL Admin to use Enterprise Manager to run the script and it worked finally.

I don't know if this is a common problem ??? But, maybe you would want to look at the SQL Server script or make a different version that would work with the Web Based SQL manager.

Thanks

Please be more specific. What hit count are we talking about ?

User Logging ? Albums ? Something else ?

Please descriube the situation in detail. There are really no settings for any sort of hit count.

I am not entirely sure how one configures the system to assign a user to a specific group.  For example, let say I have created two groups A and B, and I have pages protected by the code generated in the admin area for groups A and B.  I know I can assign access to these groups in the admin area.  However,  it is not clear to me how I do it automatically through the registration process. 

This article from my old powerasp.com site explains what Server.MapPath is and also why you can't use it to specify the data connection in any of the CJWSoft applications.

Use ASP to determine the Physical Path Of Your Virtual Website

As this article mentions you can still use it to determine the path, but you can't use it in our data connection strings because the data connection page is an include file and server.mappath will report back different paths for the different directories....... meaning it will work in one directory level but not another as the path will be different.

Permissions and Folder Locations

By default and to keep things clean we store everything in folder called "data"

That folder then has it in 4 sub folders

database (where the .mdb and temporary .ldb files are handled)
export (where the aspprotect export files are saved)
logfiles (where the aspprotect logfiles are saved)
user_pics (where the user pictures are saved)

Doing it this way makes it very easy for a system administrator to right click on one folder and set permissions for that folder and all of it's child folders.

Now, that being said.. you do not have to use these folders.

For example if you already have a folder in your web with modify permissions for the anonymous webserver account then you can use that one folder to store all of the 4 things above.

You'd simply edit your data connection string to point to that folder and then edit the other paths in the settings area of ASPProtect.

We did it that way so you would have options in case your hosting company was being difficult with your ASP hosting needs.

If you re-start the web via IIS, reboot the server, or (possibly) just add and remove a category... that will clear up.

ASPClassifieds and ASPListings must be installed in seperate IIS applications if they are the same web. Otherwise the category caching system of each system will interfere with each other. They were never intended to be installed in the same web together since ASPListings is merely a stripped down version of ASPClassifieds and they share a lot of the same code. Like I said though if different IIS applications are set up in the web site you can do it because each IIS application will have it's own set of application and session variables.

ok.. so we got an NT server with a 486 with 256 meg of ram. 

hehe  sorry

anyway.. I have the system running without doing any importing and WOW is it chugging.. I mean it takes a while even to edit/save a user

good news is the filesystem object works as I wrote to a text file

this may end up being a simple case of lack of horsepower..

we may need to do the importing on a faster system and then take the database over cause everthing I see on your server looks correct

even so aspprotect is running so slow.. I have never seen it chug like this

I even tried connecting to a 2000 version of the database and no difference.

I am not totally sure what is going on but the server resources available are scaring me... however this could be something new in the code that I never got a chance to try on NT server.. I dont think so though

how does your other stuff run ?

static pages that do not access a database seem to serve up quickly.

are you running any other dynamic code ?