My ISP uses ASPSmartMail. The email confirmation works except when I try to register an AOL user the server returns an error 500.

• What kind of encryption do you use with version 7?
• If I purchase version 7 and use it on my site with a new SQL database then migrate the old records from version 6 so I can by-pass the issue with my home-grown Base 64 encryption, do you forsee other issues with the upgrade?

a. Sorry for the missunderstanding

b . Im running XP pro and done what was explained

c. The iis stops responding - Till I make iisrest

thanks

Ran

Hello,

If you see that when doing a view source then that code is not running.

I will need to go into your site and look as something is very wrong on a low level and I have no more ideas.

PM or email me the info and I will figure out what is going on.

I'll need ftp or frontpage access to the site.
I'll also need to know the urls for the asprotect system as well as the page you are trying to protect.

CJW

There is nothing built in to the system but it is very doable.
However, you need to be a decent asp coder because your going to have to write some code.

Basically you would want to do a check on the screen where a user uploads to count how many pictures they have uploaded.

Then act accordinly and either let them or dont let them proceed.

On a side note the overall filesize limit of the total of all pictures a user can upload can be set when you edit a user.

From: Mo Afifi
Sent: Sunday, October 23, 2005 4:47 PM
To: CJWSoft Support Info
Subject: Re: CJWSoft Support Info : SSL - Verisign Certifcates

Look in the "check_user_inc.asp" file..

You'll see the name of the cookie there and also get an idea how to access it.

In most versions it looks like this.

Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME")

You'll want the cookie for the username because the session variable will not exist unless they have actually gone to a protected page during that session at the site.

It would probably be best the check for both the session and the cookie. That will make sure people logged in that arent using the cookie option still see the message you want to display.

Sorta like this..

GetUsername = ""
If Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME") <> "" Then
GetUsername = Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME")
Else If Session("Username") <> "" Then
GetUsername = Session("Username")
End If

Response.Write GetUsername

someone has to do something other than me.. i've given up

if i give u the username/pw can you set this up on the network solutions host and ask them to set whatever permissions are needed?

cant do it anymore....

You are not supposed to use "../" with a virtual include

Thats goes against what a virtual include is and makes no sense.
When using a virtual include you give the path as if accessing from the root of the main web / virtual directory

I find it very hard to believe it ever worked like that and if it ever did it was wrong.

After I approve someone's username and password, then go to send them the default e mail telling them of the approval, the e mail never goes through.  The e mailing used to work well for many months, but it stopped working.  Any thoughts?

Spider

ADODB.Recordset error '800a0cc1'

Item cannot be found in the collection corresponding to the requested name or ordinal.

/aspprotect/password_admin/default.asp, line 287

I'm doing an upgrade from an OOOOOOOOOOLD version (not sure if it was 6 or not) and it read my database OK prior to adding a new user. Now I get this error message. I was able to run the password encryption function OK, but I still get this error when I try to view the password_admin stuff. I can log in via the "get_me_in" asp page just fine, but I get the above error.

If I try to log in with my admin account, I get

ADODB.Recordset error '800a0cc1'

Item cannot be found in the collection corresponding to the requested name or ordinal.

/aspprotect/password_admin/check_admin_inc.asp, line 166

*****

OK, my question is this... if I retype all the info from the old DB into a brand new one, never before used, that would work, right? I only have 108 users, so that's about an hour of work. Or is there a 5-minute fix that I can try? I've done some messing around that got nowhere and returned all edited files to their original state, with the exceptions of the ones calling the DB location.

I'll start the C&P process and await your reply...

On a side note, I really love the new format and am excited about the new features. I'm not married to upgrading the DB and if copy and paste is faster (I just need first name, last name, username, password, email, and expiration date), then I'm using v.7 that much faster.

Chris -

I am encountering a problem with items showing up.  When I click on a category and then select an item to view I get

THIS ITEM IS NO LONGER ACTIVE
DO NOT CONTACT THIS USER AS THIS ITEM HAS BEEN TURNED OFF
OR THE USER HAS SOLD THE ITEM.

I have verified the item has the item_active check.  For giggles, I even unchecked with the same results.

Thoughts?

Different Versions of the Access Database

Below is a zip file with many alternate versions of the Access Database provided to help with installation and general usage.

2005-02-20_155310_ASPProtect_Database_Versions.zip

ASPProtect.mdb is saved as an Access97 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2000 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2002-2003 database (password "temp")
ASPProtect_access2002_no_password.mdb is saved as and Access 2002-2003 database with no password set on it

Try to use the newest version as server odbc drivers sometimes have to use the newest version for everything to work correctly. No password version is provided because sometimes there are issues connecting to a database with a password set on it.

Default username for access databases is of course "admin" but you really dont use that except in the data connection information.

Humm, I dont see how moving to a new server could have anything to do with that.

What method of displaying the banners are you using. Perhaps try some of the other ones.

Don't use the javascript method with a javascript based ad like google.. that's for sure.

Yes, you are right.

We have now tested it using the DSN less connection with Access 2002 and it works fine. We have also tested it again with a DSN using 2002 and this also seems to work.

The comment about speed is a consideration although I have not noticed any differences. ( we only have a few database entries at this time).

Thanks for your help

That’s about all I can tell you. It's just not something I support.

When I add a user, I can not activat it.

It sends me back to log on and will now allow me to log in as admin???

I can restart the APP and log in as Admin, but the user I added

is still not activated??

My system will also not allow me to set the Stay Loged in FLag.

It just ignores it....

The Pop-Up Javascript Date Pickers will only show up of your server's regional settings are set to one of two lCID values.

1033 which is English - United States
mm/dd/yyyy date format

or

2057 which is English - United Kingdom
dd/mm/yyyy date format

Many servers are set to run the default LCID which is 2048 so the banner system will not show the date pickers.

This setting can however be easily overwritten when using the ASPBanner system.

or

Session.LCID = 2057

depending on what date format you are looking to use

Save the file and go edit a banner. The date pickers should be there now.

For all you advanced users..

Here are two examples of ASP.NET code you can use on your ".aspx" pages to call banners from the ASP 3.0 version of ASPBaner Unlimited V8

This code is not supported... and you of course must change things accordingly like the variable names and zone numbers to match the zone you want to call banners from as well as the url.

2004-08-27_153832_asp.net_examples.zip

I checked with our web hosting company and CDOSYS is installed and properly registered on the Windows 2003 Server our site resides on.

How do I go about changing the ASPProtect code to use CDOSYS?

Please advise.

If logfiles do not get created it is most likely one of 3 things

1. invalid physical path specified
2. permisssions
3. filesystem object is disabled on the server

that path doesn't look correct to me for a live professionally set up server but only you or your server admins can know that for sure

you will not get any errors when things arent perfect.. just no physical logs

RecentActiveUsers and RecentPageRequrests are not related to the stored logfile feature.. Recent Activity is a different thing

Hi Chris,

We installed our key onto the live server.

However, since our temp key has expired, we can't access our application on our development machine because the login won't work anywhere except on the live server.

Of course we can access the application on dev, if we remove the aspprotect tags, but if we need to log in to do something unique to the user, then we have a problem.

Can we get another temp key from you? And would there be a better long term solution to this debug/maintanence issue?

--JP

Hi - I am a recent user of your software. I administer it for the owner. I probably missed something in your forums somewhere - but I'd like to know how to stop the software from sending an "accept registration" e-mail (after they fill out the registration page) from going out so fast - usually within minutes.  I'd like to know how to defer the message for 24 hours, more or less, so that our company can go over the registration details and decide whether to allow the person registering to actually have access to our protected website pages.  The program is working very well and we are excited about it.  So far, no problems (knock on wood!).

Thanks so much for your help!

again.. more custom code work would be required to handle it

I used Dreamweaver4 to make my site is there anything I can do to make it work?

Good Evening,

I have been trying to log into my site using the protected pages comments you have in support. I have copied the code in the ASPprotect 7 guide.

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

and pasted it in my page, set the the IIS to open this page and the page will not open it and the page will not open and the error is

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file 'check_user_inc.asp' was not found.
/olem/reldt/introduction.asp, line 3

When I remove the two lines of code everything goes normally.

I have aspprotect in its own directory in the website. I have read the installation several times and I am afraid I am missing something blatently obvious so I really appreciate you thoughts.

I am presently using redirects. I like not haveing to use them as your comments have suggested. I have pulled all that code from the pages I desire to protect during this test.

I have three test users in my database - 1 administrator

Any suggestions?

Thanks and best regards

Javascript Popup/Pop Under Generator

Until I have time to make one I suggest using the one on the banmanpro support site as it is pretty nice.

Just dont use option 2 on that page as that is specific to banmanpro

http://www.banmanpro.com/support/popupgenerator.asp

[QUOTE=cwilliams]actually, passwords can be up to 75 characters long in ASPProtect.
the only requirement when entered from a non admin user is that they are at least 4 characters long.

what does MSAccess have to do with this ? Are you trying to convert and old system or something? I noticed you created and "old password" field in there ? Is there something I do not know about as far as what you are trying to do?

Passwords in version 7 are encrypted so I hope you understand all of that and realize you can not enter or change passwords right from SQL server. Also if you import info you must handle that accordingly and convert the passwords to encrypted format. [/QUOTE]

First off, I haven't imported anything from MS Access.. The only reason I mentioned it is cuz I thought initially it worked with Access and not SQL server.

I am not converting nor entering any data manually into the db, nor have I changed anything in the way the registration is made (don't know where the "Old password" has come from? thought it was a function you made?)

MSACCESS 2000

server: windows

option pack: yes (after the install I have this problems with groups and edit users )

host permissions: yes

MESSAGGE:
Active Server Pages error 'ASP0113' Script time out/password_admin/groups.asp The maximum amount of the time for a script to execute was exceeded. ...