I think this addresses your question

http://support.cjwsoft.com/code/moreinfo144-1.htm

Hello cwilliams, and thank you for the fast reply.

Well, i have tryed with the ASPImage enabled and disabled, with the same results. I have used gifs and jpgs in the tests.
I have made some different test. Some with uploading the picture over an excisting picture and some as the first picture. Same results.
Everytime, itīs the 2nd thumbnail that wonīt show itself, but the large picture will show, if you press the thumbnail.

I have tryed to look in the code (view_ad.asp), but as far as i can see, everything seems just fine ?!

I know, it wasnīt much help i could give you, but i think i have tryed all the possibilities.

Best regards, Erling

If you need to know how to enable them on your test server.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&P N=1

Just as an FYI, I found the problem.  FP2003 has an "Optimize" feature that removes so called not needed spaces and comments from the pages.  It also completely screws up .ASP code.

I turned off the optimization feature and all the pages I was having problems with worked.  However, I would still recommend not using it too!

New Power Supply and a new (CPU Fan/Heat Sink) seemed to do the the trick. She's running like a champ now...

Hopefully it keeps doing so. Only time will tell.

It she's stable I can get back to designing some new software.

Hi all

I logged in myself to my website, and I tried to log in to another with same username and password. But I was able to log in again.

It was supposed to block me from logging in, but it let me to log in.

there has got to be some configurations I must have missed.

Could you instruct me on this Concurrrent login so mine works as well...

thanks

ASPProtect v7.x runs on Microsoft IIS servers only.
That means Windows XP Pro, Windows 2000 server and Windows 2003 server. The web server must have ASP support enabled and support Data Connections. 99% of them do as it's a pretty normal thing, but you should ask and make sure your hosting plan supports it.


Before you even start please read this thread and do what it says.
If any errors show up it is important you see the real error instead of a useless HTTP 500 internal server error.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=11& PN=1

Once doing that make sure to use Internet Explorer as you follow along with these directions.

Now, unzip your installation zip file that you downloaded from CJWSoft.
Use a program like winzip and be sure you have it set up to unzip the directories as well. You can also use windows xp's built in folder compression tools to unzip the archive.

When you unzip the application you should have all of the following folders and files. (more or less, it depends on the version)

Now, you can copy all of these files into the root of your website or if you like you can make a folder called "aspprotect" and put all of these folders and files in that folder. Either way it really does not matter.

Now, contact your web hosting company and instruct them that you need permissions set on the data folder that you copied into your website. This folder and all of its child folders need modify permissions set on it for the anonymous webserver account. It is very important that they set the permissions correctly and on all the child folders as well.

Here are some threads on exactly how these permissions are set.
If you run your own server or are developing locally you can do this yourself. If not most likely you need to put in a request to your hosting company as you CAN NOT set these permissions via Frontpage or FTP.

Windows 2003 Server and permissions
http://support.cjwsoft.com/forum/forum_posts.asp?TID=136& ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;PN=1

Windows XP Pro and permissions
http://support.cjwsoft.com/forum/forum_posts.asp?TID=56& PN=1

Once permissions are set.. run this page via your web browser

http://www.mysite.com/data/setup_info.asp

Replacing the part in blue with your website info.

When this page is run it will report back a screen like so:



Now, take the connection string info it shows you.
Edit the "dataconn_inc.asp" file in the root of the ASPProtect system and use that data connection information. It should be valid for the server.

If you are using MSSQL server instead of Access please see the SQL database creation directions as you will need to create the MSSQL database and use a special connection string for that.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=160& ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;PN=1

Now, take the CookieEncryptionKey and PasswordEncryptionKey info that it gives you and enter it into the "config_inc.asp" file in the root of the ASPProtect system. These will be the unique keys that your encryption will be based off of.

Ok...

The files have been copied to your website, the permissions are set on the data folder, and the database connection is ready.

Now.. run this page

http://www.mysite.com/password_admin/get_me_in.asp

Replacing the part in blue with your website info.

This is a special page we use to get into the system for the 1st time.

If you get a nasty error when you run that page similar to this.

Error Type:
Active Server Pages, ASP 0131 (0x80004005)
The Include file '../dataconn_inc.asp' cannot contain '..' to indicate the parent directory.

Then parent paths are disabled on the webserver and you need to do an extra step to deal with that. Follow this link.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=162& ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;PN=1&TPN=1

If you get any other variery of "80004005" error then there is a problem with your data connection.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=27& PN=1

Those errors are usualy related to database folder permissions or an imcorrect physical path to the database file specified though they can mean a lot of things.


Once you get the page running you will see a login prompt and one form field

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see the admin area of ASPProtect.

Now that you are in the system you need to create an admin account.

Click on "ADD NEW USER".. fill out the info and add a user.
You really only need to fill out (first name,last name,email,username,and password)

Now save that user.

You should see a new user listed in the admin area. Click on Edit user to the left of the new account. On the edit screen check the "admin" checkbox and save the user.

You just created an Admin account.

Now click on the "log off" button on the top menu and click yes to log off.

Now close the browser. Then run this URL

http://www.mysite.com/password_admin/default.asp

Replacing the part in blue with your website info.

You should now be able to in to the admin area of the system using the new admin account you created.

You are now ready to go to the settings page so click on the settings tab in the menu. There are a lot of options and paths that need to be set on this page. Every setting is described in detail on this page. You need to go through the page and set things up properly. Anytime the page asks for a path to a url or file the page will auto generate what should be the path to use. (expected path) If your server has parent paths disabled a few of those auto generated paths will not show up. If that is the case run this url from your server and it should tell you the paths to use for those settings.

http://www.mysite.com/data/expected_paths.asp

Replacing the part in blue with your website info.

Once your all done and the system seems to be running fine you should go back and delete the following pages as they are no longer needed and pose a potential security risk.

http://www.mysite.com/data/setup_info.asp
http://www.mysite.com/data/expected_paths.asp
http://www.mysite.com/password_admin/get_me_in.asp

You should back up the original zip archive you got from CJWSoft in case you ever need those files again.

VERY IMPORTANT: The user passwords from now on will be encrypted using the "PasswordEncryptionKey" you specified in the "config_inc.asp" file.

If you ever change that key all of your passwords will be invalid and you can not get them back unless you know the key and put it back, so plan on never changing that key unless you really know what your doing and know how to decrypt/re-encrypt the passwords using a new key. (something we do not cover at the moment but probably will when we have time to make a tutorial) 

I did everything mentioned here but it do not work ;(

The "forgot your password" feature is not sending passwords to users when they put in their emails.

Any suggestions?

Thanks

I did try to redit the banner and the old link was there, not the new one.  In addition I tried to ad a new banner to an account but it too was not saved.

Since I can see the banners from the aspbanner solution, does that not tell me that the solution is properly connected to the database?  The only thing is the solution only appears to be able to read the data and not write or delete it.

The settings for the directory are read write execute and delete so I am not sure what I need to do to get it working again

I have a very weird problem.  At the top of the page, where there used to be

[Place Ad] [Classifieds Home] [Register] [Sign In]

now there is only

[] [Classifieds Home] [Register] [Sign In]

so the words "Place Ad" have disappeared completely.  Can you please tell me which file in which folder would control this

Hi Chris,

I tried changing using Notepad in the config_inc.asp

from:

If  Application("SERVER_SOFTWARE") = "" Then
 Application("SERVER_SOFTWARE") = Request.ServerVariables("SERVER_SOFTWARE")
End If

To

Application("SERVER_SOFTWARE") = "iis/6"

and the albums still do not show up under the categories

Rhona (rookie)

btw: who is this hosting company anyway ?

and did they give you access to a control panel that lets you manage your site ? sometimes that is where you manage those permissions if their interface supports it

lastly, are frontpage extensions installed in your web so it can be connected to via frontpage ?

ok, I am home.. missed flight.. just got home an hour ago.

lets see.. I really need more info...

For starters are you using the delayed stats feature ? that is expirmental and could cause that problem

I will actually explain how to set access_levels and/or groups...

in "users/add_new_account.asp"

I guess i am not being clear as to what i am trying to do. As far as the event thing... lets hold off on that for now. It seems Chris has answered my question and i am on my own for that one...

As far as the log in goes: I went to that site you mentioned;www.CafePress.com to see if they had what i was talking about. and they do. Notice on the bottom of the page it says "sign in to your account"

I want that option on my home page where users can sign in to go to their account. It will either take them to a page where they can update their info, or it will take them to a protected page. Pretty much instead of posting a link on the site to say... click here to go to members.aspx and have it return an "access denied" the user can enter their info from the main page and be automatically re-directed to that members.aspx page.

I know how the viewstate works and i also know what that returnURL thing does..pretty self-explanitory.

Hopefully that makes things easier. I just want a user to log in from the homepage and be redirected to either a protected page or their account page...

(as does that cafepress website)

Dear Support Team

I have read and Installed your v8 banner software

exactly as explained on XP pro which contains other asp working app.

I have problems with the " Application " and " Session" in your scripts

things that make the iis fall dead.

also in the file asp _unlimited_config.asp

you have exlained that every thing must be kept without the "" marks.

well i get http 500 error cause of it.

Please advise

Thanks

Ran

Ok, I was not aware of this domain controller issue as I have never had a customer have their web server set up that way. It is not a common situation under commercial hosting, thats for sure.

http://support.microsoft.com/default.aspx?scid=kb;en-us;3151 58

seems it was some sort of bug that was corrected in the the 1.1 .NET framework involving no ASPNET account being created. seems there are lots of work arounds involving making new accounts and editing machine config files. I found quite a few google articles as well.

http://www.kbalertz.com/kb_315158.aspx

http://www.15seconds.com/issue/030115.htm

I actually should have said "the framework installed" not "asp.net"

So, in the meantime I am asking John Evans what he thinks about this and I am going to ask you what version of the framework you have installed ? ASP.NET Framework 2.0 is the newest and you definetely should be running at least version 1.1 and probably should upgrade to 2.0.

I do not know why other ASP.NET code you have works ok. Your other code may not be using the odbc driver dll the same way ASPProtect.NET does. There are lots of possible reasons. At the end of the day I think the basic issue here is still a low level configuration/permissions issue and it can be corrected from what I am reading. It just may require a bit of trial and error regarding local and domain accounts and editing the machine config files... etc etc

To be honest I just can't remember what happens. It has been a long time since I did a real live test of that. I know it seemed like a pretty smooth process to me. Right now I can not test it out as I am on a road trip with my motorcycle and I am sending this email from my PDA.

I would ask Dave at this website.
http://www.davephoenix.com/

Or via this username in the forums
PhoenixUK

He can tell you what happens as he has been using the IPN stuff for about a month now.

Perhaps another user could chime in here as well and let us know. I know there are a lot of people using the IPN stuff.

Perfect exactly what I was looking for.

Thanks

well, I was curious myself so I just tried it.

Good news is it worked just as I thought.

Only problem is your changing things to allow authentication info to be passed over the net in a url. If you can live with the security implications then it will work. I mean a sniffer could see that and end up knowing the username and password.. not likely but just putting that out there.

Of course now that I think about it unless you are running under SSL (https://) when you log in normally that info is in the post info anyway and possible to get at.. course not right out in the open like when you put it in the url and less likely to be noticed.

As long as your not doing it to access critical areas like the admin pages... and you monitor the log files once in a while it's probably nothing to worry about.

Just to let you know that i figured out my problem. I had to modify the connection in the email code and get the correct path from my provider.

I hope you enjoyed your vacation.

Thank you
Adam

Just wanted to say how much I like the program! I hunted for days and finally purchased a Perl based product. After several days of goofing with it I gave up. ASPPhoto worked right on first install!!!!

Way to go!

Wondering what might be causing a long delay to display the login screen?  This does seem to be intermittent.  Could be server/ISP related? Have experienced enough times to justify posting this question.

I can count up to 20 seconds after clicking on the link.  After login all other selections zip right along without problem.

http://gibsoncity.us/aspbanner/

Thanks, Lance

Another good tip is to make a copy of the "password_admin/default.asp" named whatever you like..

"default2.asp" would work...

then maybe add a link to it from the header_inc.asp file

then you can modify that one all you want and your will still have the original around.



That concept works for a lot of things.. for example you could make a copy of the "users" folder and call it "users2"  granted a few paths might need to be changed here and there but really not a lot. (how do you think the paypal signup folders were created, they started as a copy of the "users" folder of course)

You can even make a copy of the "check_users_inc,asp" file if you like. Then make a copy of the "scripts/login_form_inc.asp" file... then make your new "check_user_inc.asp" file reference it.

Then you can password protect pages using different versions of the "check_user_inc.asp" file. Why ? well maybe you want different looking logn forms for different parts of your website or you want to make a lot of changes to the "check_user_inc.asp" file and want to leave the original alone.

The sky is the limit really. When it comes down to it besides the actual guts of the "check_user_inc.asp" file ASPProtect is nothing but html tags and chunks of simple server side code that produce more html dynamically. What your browser ends up with is basic html. (some client side javascript in certain cases, but that is pretty basic stuff too.)

More Upgrade Info

To upgrade an existing ASPBanner system please follow these steps.

Back up your old system completely before starting.

Install the new system per the installation instructions that came with it.

Once it is running simply use your old ASPBanner database with the new system.

You may also want to keep your banner images folder from before in the same location so your existing banners still link to valid image urls because the new system stores banner images in a new location.

Since the config table in the database is no longer used you will need to go to the settings screen of aspbanner again and configure things. The config table in your old database can be deleted or left alone. It won't be used anymore so it does not matter either way.

That is all there is to it. If you have any issues please ask in the forums and we will help you out.

This is great documentaion for windows script 5.6
in windows chm file format for jscript and vbscript.

We use server side vbscript in all our our ASP 3.0 applications so this info can be a lot of help.

2005-02-18_150921_vbscript_docs.zip

<compilation defaultLanguage="vb" debug="false" />

change it to this

<compilation defaultLanguage="vb" debug="true" />

When you run the code in a production environment change it back though

More Info
http://support.microsoft.com/default.aspx?scid=kb;EN-US;3061 56

Yes, I was referring to ASP Protect.

I had about a dozen people access the same account, but it is highly unlikely that they would all try at the same time (unless there were several hundred people who had access). Having an enhanced login abuse would be nice.

Hi,

Actually that is not a feature at this time. Only the admin can add an image for user. If you look at the code for that you could adapt it for individual user use fairly easily provided you are decent with ASP.

That feature will probably be added some day, but there was no time to add it to into the current version and I can not give you a time on when it will be added. The complicated part is making some sort of approval process in case a user adds something undesirable and also limited file sizes which is hard to do without somesort of 3rd party uplaod component being involved.

that wont work the way you did it because groups are not stored like like.

groups are stored "*1*"
or "*1*,*9,*"

so if you test for them you must do so using the InStr function of vbscript

example:

If InStr(Session("Groups"),"*1*") Then
    ' do whatever
End If

also.. as for the session variable
it should be    Session("Groups")

And in Version 6.... (its all ready to go in version 7) that session variable must be saved in the check_user_inc.asp file near where all the others are saved. If it is not there by default "I dont remember if it is or not" you have to add it like so near where all the others are saved

Session("Groups") = CmdCheckUser("Groups")

If you are wondering if it is being saved correctly you can always response.write out the Session("Groups") to see if it holds a value

New question...

When someone edits their personal information, such as address, is there any way to set it so that someone in the office can receive an e-mail noting the changes?

Thanks.

User Registration

The "users" folder allows users to sign themselves up and edit there accounts as well as retrieve lost passwords..

In the settings tab of the ASPProtect admin area there are options for which fields are used and which are mandatory when a user signs up. The only validation the system performs by default is checking for mandatory status. If you want to add more validation so reduce the chances of input errors that is up to you.

You can add additional server side validation by doing server side checks on the save pages... you can also make the field sizes larger in the database if you think you need to. You'll need to be good with ASP to do this.

Always backup your files before making changes to them so that you can revert back to a working copy if you mess something up.

humm, I dont know then..

If you want PM me your site info and I will go in and troubleshoot.

Frontpage or frontpage access, either way

and also the site URL