edited due to inappropriate content

Hi

I have purchased the Standard version about a week ago. Its a great script.

I have been able to select  uploaded banners from day one... but just now i dont seem to be able to select...

i know its hard for you to trouble shoot with such little information.. but i had to ask..

Should i maybe upload the site again ( but same the database first)?

regards

Domenic

Sydney, Australia

((TITLE EDITED BY ADMIN))


it would be nice if there was an option for login abuse, where a login account would be flagged if it logged in from x number of different IPs over a period of time. I know many have dynamic IPs, but there's got to be a balance between legitimate logins and logins that are 'shared' for the sake of saving money (I sell subscriptions), in the end costing me.

Maybe searching the first two number groups in the IP (example, 209.168.*.*), and if finding more than an admin specified number of logins per week from IPs with different first two groups, the record would be flagged or locked...

Thanks for the info.  We'll do as you suggest.

NPA

Thanks for your rapid responses, your support is excellent!

It may be best that I stick with html then. You mention that is stresses the Version 7 software, would the unlimited version perform any differently if I use multiple zones?

Also, if I do go with a single zone, would either program be able to make sure each banner is unique, or would there by duplicates for each page view?

Sorry to post so many questions in one day.

Thanks

It wasn't a complaint. I just bought it last night and installed it today. But, I must have missed the part about requiring Enterprise Manager for installing it on SQL.

If you want it the link to the Web Based SQL Manager is : http://www.aspenterprisemanager.com/ which is free and the Trialware that I tried is EMS SQL Manager.

Maybe that will help a little in not requiring that people have an MS SQL license to access their hosted MS SQL to install the software.

Thanks

the reason being is because when I do installs I do not touch any of your existing content. I only install the base application and make sure everything in it working correctly and also that the example protected pages are working. I do not integrate it with your existing site or edit any of your existing web content. That is up to you

sorry about that, but it would be way too time consuming and editing people's existing pages is a good way to cause a lot of headaches for me and the customer if something goes wrong. Not only that but everyone uses the system differently and it wouldnt make sense for me to be the one doing that based on access levels, groups.. etc etc  which will all be custom to how you want things set up.

more on installation policies here.
http://www.cjwsoft.com/installation_service.asp

ok, well if you want to test on your own....  in the ipn.asp file for the subscription folder you will see this area of code used for testing

' Un-comment this section and give this directory proper permissions to enable logging to a text file
' Very helpful for troubleshooting
'   Set ObjMyFile = CreateObject("Scripting.FileSystemObject")
'   LogFileName = ("paypal.txt")
'   'Open Text File.. If doesn't exist create it and append to it .. If exists just append to it
'   Set WriteMyData = ObjMyFile.OpenTextFile(Server.MapPath("paypal.txt"),8,True)
'   RowHeaderString =  ""
'   RowHeaderString =  RowHeaderString & OrderID & vbTab
'   RowHeaderString =  RowHeaderString & Custom & vbTab
'   RowHeaderString =  RowHeaderString & User_ID & vbTab
'   RowHeaderString =  RowHeaderString & subscr_id & vbTab
'   RowHeaderString =  RowHeaderString & txn_type & vbTab
'   RowHeaderString =  RowHeaderString & subscr_date & vbTab
'   RowHeaderString =  RowHeaderString & Access_level & vbTab
'   RowHeaderString =  RowHeaderString & Groups
'   WriteMyData.WriteLine(RowHeaderString)
'   WriteMyData.Close

now that folder will need modify permissions for the text file to be written to but this is a good way to test if the ipn.asp page ever gets hit by paypal.

ITS REAL IMPORTANT THAT THE TEST FILE CAN BE WRITTEN TO OR DOING THIS WILL JUST CAUSE MORE ISSUES

To ensure the text file can be written to and permissions are correct for that folder you can make a new .asp in there and run this to see if the text file writing works

   Set ObjMyFile = CreateObject("Scripting.FileSystemObject")
   LogFileName = ("paypal.txt")
   'Open Text File.. If doesn't exist create it and append to it .. If exists just append to it
   Set WriteMyData = ObjMyFile.OpenTextFile(Server.MapPath("paypal.txt"),8,True)
   WriteMyData.WriteLine("the file was written to")
   WriteMyData.Close

Now, you can even change the location of the text file to place that does have permissions if you like.

This is what I would do if I was in there... then I would make some test payments using 1 cent and another paypal account (your allowed 2)

and see what happens

it is always possible the subscription code may have a bug in it. The last time I tested I only tested the single payment folder which worked perfectly. If I have time in the next couple days I am going to test the subscription stuff again. If there is something wrong I can cure it quickly.

The two routines share a lot of code in common.

Now, we can connect to the MySQL database with ASPBanner using the following connection string if we like.

"driver={MySQL ODBC 3.51 Driver};server=localhost;port=3306;uid=root;pwd=temp;databas e=aspbanner;option=16386"

But we really do not want to connect to the aspbanner MySQL database using the "root" account

So, lets make an account to use..

In MySQL Administrator select "User Administration"

Down below you will see the user "root"

Right click on "root" and select "Add new user"



Type in a New MySQL Username and Password

I am going to call my new user "aspbanneruser"

Hit the Schema Privileges" tab



In this case since I am using the root account to manage my MySQL system I am just going to give this new user account what it needs to use the aspbanner database.. you may want to apply more permissions to the new account, that is up to you.. I am giving the new user (select, insert, update, delete, execute) So I right click on the aspbanner and then bring over the permissions I need for it.. and hit apply changes down in the bottom right.

We can now connect to the aspbanner MySQL database using this new account like so.

"driver={MySQL ODBC 3.51 Driver};server=localhost;port=3306;uid=aspbanneruser;pwd=tem p;databas e=aspbanner;option=16386"

------------------------------------------------------------ -----
article still in the process of being written (3/14/06)

Aspprotect issue

I need the ability to allow users to view url links on a page, based on the

group(s) they are a member of.  If the user is the member of one group (group 1 in the following example) the code works fine.

<% If Session("GROUPS") = "*1*" then %>  "view link #1"

However, if the user is a member of more than one group (let's say 1 & 5), I cannot make the code work.  

I have tried various versions of wildcards, nothing seems to get me there.

I fairly new at ASP, and I am sure I'm missing something simple.

Any help would be appreciated.

i've got a client who has handed me a 151 character banner URL, and i see that the database is designed to take 150 characters. i took the obvious step of just increasing the size of that text field in the database, but i still get this error when i try to enter the URL in the proper form field:

Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.

/banners/aspbanner/save_banner.asp, line 200

now, line 200 is just this:

If Banner_Link_URL = "" THEN
 CmdEditBanner.Fields("Banner_Link_URL") = NULL
Else
 CmdEditBanner.Fields("Banner_Link_URL") = Banner_Link_URL
End If

which tells me that something is blocking the assignment of that long value to that field, even though i believed i had extended the length of that field in the source database.

where else might i look?

Protecting ASP Pages

To protect a page without using the Access_Level or Groups feature simply add this code to the top of that page.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in.

An example of doing this is provided in the "default.asp" file included in the root of the Password System.
Look at the source code with a text editor to see the working code. It is quite simple.

 Protecting ASP Pages Using Access Levels

To protect a page using the Access Level feature simply add this code to the top of that page.
You simply specify the Access Level before the include file is called. In this example we are protecting the page with Access Level 4.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<% CHECKFOR = "4" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in as a Level 4 user.

Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System.
Look at the source code of the ASP pages in that folder with a text editor to see the working code. Again, It is quite simple to follow.

Protecting ASP Pages Using Groups

Please see the code generators in the admin are for the code to do that.

I do not think it it anything to do with the Application.

You most likely have some sort of ad blocking software that is doing it.

It is seeing the word "banner" or "ad" and blocking the images in your browser.

I doubt it is anything built into xp doing it. XP with SP2 has built in pop-up blockers but no ad blockers like that really. It is norton ad blocker or something of that nature.

in Control_pic.asp is there way to wrap the description field so that it doesn't go outside the table.

Thanks

I am using cdont to send email. what do i have to do send email to other display my full name instead  of email address. In other word I want to see first name last name  in their email client instead of email address.

thanks for your help

The way the application ships there are no password confirmation areas anywhere ? Please be more specific as to what you have done and if any mods are involved ?

If you are talking about one of the MODS please realize they are not supported. http://support.cjwsoft.com/code/moreinfo459-1.htm

Even though they are not supported I look them over pretty closely and I know of no issue like you mentioned so I would suggest re-downloading the MOD. Perhaps you got a corrupt download or file.

Not really.  The way I thought activity would work is that I would always see the last 50 users.  Not sure what controls that and why I wasn't seeing it, but it sounds like it is an IIS thing and since my site is not all that busy, it will not show the users if some process has reset the numbers.  Not a big deal.

As for the log files, I think it is related to my other question regarding the export directory.  I have the ISP looking into things at thier end to see if they are doing anything that could cause the directories to disappear.

Thanks,

Dave

I'll give it a shot loading it on the laptop and publishing it, if it doesn't work I'll let you know and you can take a look at it tomorrow afternoon.  Thanks for all the help tonight...

Good luck pouring that concrete!

Is there a way to upload photos to individual user directories? I don't want all the picture files in a single directory.

Thanks,

Steve

If you bought ASPBanner Unlimited Version 7.3 Before August/10/2004 this file needs to be updated.

It fixes a bug where the JavaScript method is not properlly closing an html Image tag. It can cause other hyperlinks on your web page to link to the same place the banner links to. This does not always happen but this fix is the way the code should be so it is best to update it.

Copy this file into your ASPBanner folder over the existing file of the same name.

2004-08-10_125304_injectbanner.zip

Hi Chris,

Thanks for the answer. No, I am not using Paypal since these are employees and sales reps. I guess i'm on my own on this one. :)

Thanks
Sylvain

enjoy the bar.. drink one for me.. cause that was the problem..

I was able to get it all figured out.  Thanks a lot for your help, I really appreciate it.  I ended up copying the database with the password to the directory and used the user/password connection code and it works great.  I believe it was related to that but I cannot be sure.  Thanks again!

Thanks Chris.

Your solution worked!

ok.. the count your talking about wont increment until someone other than you views the page.

After that you can increment it one time...

It keeps track of the last IP that hit it.. if it is the same it doesn't increment

This is all by design...  so the same person doesn't increment the count over and over..

It's simplitist and it can be tricked... but it does what it needs to do 

Well. fontpage publishing is evil. That you have found out.

Do not use it. It usually wont work right when running asp code locally and also at the server because of differences with the paths and virtual directory structure. etc etc etc

You can definetly use frontpage to connect to the web site live and drag and drop files into it/edit them... but the sooner you stop using the publishing feature the better off you will be.

Greetings:

I am doing the initial set-up and have run into a problem. Everything has gone smoothly up to and including pulling up the get_me_in.asp page. When I enter the "PasswordEncryptionKey", nothing happens. The page just sits there without doing anything and the browser says it's opening the page, but never does. I have tried entering the value with and without the double-quotes. The value is the correct one from the config_inc.asp file. I did a copy paste from the file twice to insure I transferred it correctly.

I am running Windows 2000 server.

What now?

Warren