so use the connection string the readme.txt in the sql installation folder file tells you to... it has the correct username.. I just posted that info above

or change the username in the connection string so its rigfht

or go into sql and give any user you want access to the database and use them

Any connection strings that come in the datacon_inc.asp file the way it ships are examples. We fully expect people to edit them.

Also.. the SQL scripts primarly goal is give you a properly set up database with correct files and table settings. Users and permissions often need a little extra attention from the installer as that part doesn't always get set right by the scripts It really all depends on what sql user you are when you execute the scripts. Many times the user someone logs in with doesn't have permission to make users and set permissions.

Okay thanks, I'll have to consider wether or not to go down the path of the upgrade or cut my losses as the Access cannot handle the pressure

It's just errored out again with the following message:

msxml3.dll error '80072ee2'

The operation timed out

/forum/banner.asp, line 15

Regards,

Dave

My site is composed of mostly asp based pages with some javascripting thrown in, but a fair amount is strictly html and javascripting. Currently I am using the javascript banner method throughout the site.

You have mentioned in the past that several other methods might be a better option for asp pages.

Examples would be:  XML Parser Method or asphttp method.

I was wondering if it is possible to use the javascript method on my non-asp pages and maybe the asphttp method on the asp pages and all in the same Zone?

Or, is it possible to use the asphttp method on all pages, whether they are asp or not?

I'm just trying to figure out what is the most efficient way to use the banner system.

Or maybe should I just keep it all javascript method?

Any helpful feedback would be appreciated!

Thanks.

-john

For pay signups you set the groups during signup it like this thread tells you to

http://support.cjwsoft.com/code/moreinfo186-1.htm

only difference is you need to specify the groups info like so
(basically getting rid of the commas and just leaving behind the group numbers with a * around everything)

Also be sure to have no double asterisks

so, *1*,*2* would just be *1*2*

so, *1*,*2*,*5* would just be *1*2*5*

Is it possible to change the currency for accepting payments?  I will like to change from US to Canadian.

Thanks in advance
Roy

that really does not make any sense...

I dont know what else to tell you as this really shouldn't be anything too difficult to sort out...

redirection based on criteria is not something aspprotect does by default... I try to help a bit... I've shown everyone how to do it in this thread...I know plenty of people doing it... I've done it myself... I know it works

let me ask you this... are you using ASPProtect 6 with the Option Pack ?
I assume you must be or you would not have the Groups feature ?
And you asked this question in the ASPProtect 6 section.

but then maybe your using 7.. I do not know

this should all work the same either way

That’s about all I can tell you. It's just not something I support.

The company that hosts our business web site has been impossible to deal with in assisting me in getting asp protect to work. Getting the rights set correctly took 6 days and then getting parent paths enabled has been impossible. There last response was simply this:

The includes were changed so that if your server does not support "parent paths"
' and the "../" that you could easily change a few files like this and make the
' includes virtual includes instead of file includes. We didnt make them virtual
' includes by default because depending on where in your site you put the application
' the virtual include path would be different. They are also much different on a local
' development server than they would be on your real server
'
' Here are some examples of what you might change these includes to
'
' If you put the aspprotect folder in the root of your domain at your server
' example: www.mydomain.com/aspprotect
' then you would probably use
'
' #INCLUDE VIRTUAL="/aspprotect/dataconn_inc.asp"
' #INCLUDE VIRTUAL="/aspprotect/config_inc.asp"
' #INCLUDE VIRTUAL="/aspprotect/scripts/emailing_subs_inc.asp"
'
' Or if you didnt use the aspprotect folder and just put the contents of it in the root
' of your domain
' then you would probably use
'
' #INCLUDE VIRTUAL="/dataconn_inc.asp"
' #INCLUDE VIRTUAL="/config_inc.asp"
' #INCLUDE VIRTUAL="/scripts/emailing_subs_inc.asp"
'
' It really all depends on what works for your situation
' If you want more information on server side includes read this article at PowerASP
'
' http://www.powerasp.com/content/code-snippets/includes.asp

I am assuming that they will not enable parent paths and I need to modify some code. I do not know asp. WHere do I modify the code for a server that will not enable parent paths?

Thanks,

D

Hope the wedding went well.  I have one this weekend.

I was successful at performing an upload.  The free upload software was either not configure properly (probably) or not working.  I downloaded the trial version of softartisan's upload (which is like over $300) and it started working. 

Can more than one photo be uploaded at one time (like a whole folder full of photos) or does each have to be done individually?

Christopher

Found this but I dont really know what to do with it or even if its the right thing.

<%
'=========================================================== ==================='

' Application:     Utiity Function
' Author:          ; John Gardner
' Date:         & nbsp;  20th December 2004
' Description:     Used to check the validity of a postcode
' QueryString:     None
' Version:         V1.0

' Required routines:        &nb sp; None
                    
'----------------------------------------------------------- -------------------'

function Check_Postcode (byRef strPostcode)

' This routine checks the value of the form element specified by the parameter
' for a valid postcode.

' The definition of a valid postcode has been taken from:
' http:'www.royalmail.com/docContent/other/Downloadable_Files/ PAF_Digest_Issue_5_0.pdf

' If the element is a valid postcode, the function value is returned as TRUE
' and the postcode is returned in uppercase with the separating space in the
' right place.

  Dim strPostcodeRegExp(2)   ' holds the regular expressions for valid postcodes
  Dim intCount        &nbs p;      ' For loop counter
  Dim strPostcodeCopy        ' Copy of postcode
 
  ' Variables used to hold regular expression object  
  Dim objRegExp, objMatches, objMatch
 
  ' Expression for postcodes: AN NAA, ANN NAA, AAN NAA, and AANN NAA
  strPostcodeRegExp(0) = "^([a-z]{1,2}[0-9]{1,2})([0-9]{1}[abdefghjlnpqrstuwxyz]{2})$"

  ' Expression for postcodes: ANA NAA, and AANA  NAA
  strPostcodeRegExp(1) = "^([a-z]{1,2}[0-9]{1}[a-z]{1})([0-9]{1}[abdefghjlnpqrstuwxyz]{2})$"
 
  ' Exception for the special postcode GIR 0AA
  strPostcodeRegExp(2) = "^(gir)(0aa)$"

  ' Copy the parameter and convert into lowercase
  strPostcodeCopy = Lcase(strPostCode)
 
  ' Assume we're not going to find a valid postcode
  Check_Postcode = false
 
  ' Strip out spaces
  strPostcodeCopy = Replace (strPostcodeCopy, " ", "")
  Check_Postcode = False
 
  Set objRegExp = New RegExp
 
  ' Check the string against valid types of post codes
  For intCount = 0 to Ubound(strPostCodeRegExp)
 
    ' Check next pattern in list
    objRegExp.Pattern =  strPostcodeRegExp(intCount)
    If objRegExp.Test (strPostcodeCopy) Then
   
      ' Post code found. Ensure input parameter is in correct format.
      Set objMatches = objRegExp.Execute (strPostcodeCopy)
      Set objMatch = objMatches(0)
      strPostcodeCopy = Ucase (objMatch.subMatches (0)) & " " &  Ucase (objMatch.subMatches (1))
     
      ' Show that we have found the postcode
      Check_Postcode = True
    End if
  Next
 
  ' Ensure that the uppercase postcode gets returned if valid
  If Check_Postcode Then strPostcode = strPostcodeCopy
 
End Function
%>

regards

John

also.. every once in a while I get some nervous person concerned about security... and the pros and cons of having parent paths enabled.

etc etc etc

so let me add this bit of info..

I don’t know what your hosting company will say because it is an iffy topic and those that understand it have a hard time explaining it to someone who doesn't. Also usually the hosting company doesn't have a clue except they heard it was a security risk.

Is there anyway to limit the number of Albums each user can make?

ok, I just sent you a private message with download information.

replace you existing

"check_user_inc.asp"

"admin/check_admin_inc.asp"

"admin/email_user.asp"

with the new versions in the download

Do some testing to make sure that HANNAH password works ok for you.

Hopefully this cures the issue...
If it works ok for you for a while I will offer the fixes to everyone and start using this code from now on

BTW:
"admin/email_user.asp" had an unrelated bug in it that only happened if its error handling got triggered... it was posting back to the wrong page when that happened and causing an error

SQL Server Datareader Datawriter Permissions..

here is a screenshot that shows how to set datareader and datawriter permissions on a database using "SQL Enterprise Manager"

In this example we are making sure the aspbanneruser has those permissions on the aspbanner database in the SQL Server

LOL

I downloaded v7 3/7/2005

I entered a password that was supposed to be all caps with only first letter caps. 

it is odd, if I go to other user and enter wrong password that does not come up.  it apprpriately goes to a screen that says Access Denied.

thx

Hello cwilliams, and thank you for the fast reply.

Well, i have tryed with the ASPImage enabled and disabled, with the same results. I have used gifs and jpgs in the tests.
I have made some different test. Some with uploading the picture over an excisting picture and some as the first picture. Same results.
Everytime, it´s the 2nd thumbnail that won´t show itself, but the large picture will show, if you press the thumbnail.

I have tryed to look in the code (view_ad.asp), but as far as i can see, everything seems just fine ?!

I know, it wasn´t much help i could give you, but i think i have tryed all the possibilities.

Best regards, Erling

That would not happen unless you added a target to the login form or you're code had a base target set.

Like so..

<base target="_blank">

I would really need more detailed information. It's nothing the system does the way it ships under normal circumstances. For example you shouldn't see that behavior in any of the example protected ".asp" pages

that is unless you have something odd going on with your browser settings or you made changes to the login form or code around it causing it. (or you are using frames and dont have some of the targets and what not set correctly)

My guess is that it has to be something you added or did, but I really need to know more to offer more than that.

If you have an album with more than 96 pictures, the spacing in the tables can become incorrect, with pictures touching each other. (This program is not designed to handle more than 96 pictures due to server speed, but it can handle more than 96 with minor changes to the code.) Also, after 96 pictures, the pictures will not have 6 on a line, but rather 6 on a line up to 96 pictures and then the rest of the pictures on one line next to each other extending to the right of the screen endlessly. To fix this, I simply edited the ASP code using the following loop. It can be a perminent fix, because I used the maxpicsperalbum variable to define the spacing.

<%
Dim SixInterval
For SixInterval = 2 to maxpicsperalbum
 SixInterval = SixInterval + 5
%>
 <% If PicIndex = SixInterval THEN %> 
  </tr>
  <tr>
 <% End If %>
<% Next %>

Then, the following code must be commented out:

<% If PicIndex = 6 or PicIndex = 12 or PicIndex = 18 or PicIndex = 24 or PicIndex = 30 or PicIndex = 36 or PicIndex = 42 or PicIndex = 48 or PicIndex = 54 or PicIndex = 60 or PicIndex = 66 or PicIndex = 72 or PicIndex = 78 or PicIndex = 84 or PicIndex = 90 or PicIndex = 96 Then %>
 </tr>
 <tr>
<% End If %>

This code can be found in scripts/view_album_style*STYLE NUMBER*_inc.asp . (STYLE NUMBER depending on which style you are using (found in config file))

This change in code will enter a new table row after each 6th picture. You can have more or less than 6 pictures per line depending on the width of your files and preference by changing  changing the number 5 in this line of code: SixInterval = SixInterval + 5

If you have any questions, JPortnoy@Checkernet.com

Perfect. Thanks buddy :)

  Hi, we purched ASP Protect a few months back and had it installed on our hosting company under a "temporary" domain name -- cidrasensors.com

We are now about ready to switch this development site over to production and I need to change the domain from cidrasensors.com to cidra.com

My hosting company wants us to create a new accounting and re-set everyting up.

So...based on this, I have a few questions for you:

1. Do I need to re-install the software? or can I copy from one account to the other?

2. Assuming I can copy the software to the new account - are there changes that will need to be made to point to the new domain?

3. If I decide I wanted to keep the first account alive for development purposes (never turn on the website domain to the public) - would I need to have a seperate ASP Protect license? 

4. If I decided to ask you to do the transfer for us - is that covered in the $20 Installation fee I saw on the web?  

humm, I dont know then..

If you want PM me your site info and I will go in and troubleshoot.

Frontpage or frontpage access, either way

and also the site URL

Ok I used the following for the sql string.. is this correct?

SELECT COUNT(Album_ID) AS Alb_Count FROM " & tbl_label_albums & " WHERE (User_ID = " & CmdListUsers("User_ID") & " AND Album_Active = '-1'" & ")"

Thought that was already done....

Back to the drawing board...