I am getting the same error looking at the previous post, I looked in settings and my Registration-URL is pointing at the correct location.

Is there any other thoughts on this issue

Thank you!

Matt2112

Hello,

Yes, that is how it works. Unless you make modifications to the code there is no way to easily do what you are talking about.

If you design the site to be intelligent that scenario should never happen.

For example.. you should only be offering links to pages that the current logged in user has access to. You do this by checking the session variables and with simple if-else logic around your html links.

It requires some work but if you dont give them links to pages they dont have access to what you are talking about will not happen.

Here are some simple examples.

Here is an example using access levels.

<%
If Session("Access_Level") = "1"  Then
' show links to pages that allow access level 1
End If
%>

And one for groups..

<%
If Instr(Session("Groups"),"*6*") or Instr(Session("Groups"),"*7*") Then
' show links to pages that allow groups 6 and 7
End If
%>

OK.. I went with using ASPEMAIL.  The above did not seem to work.  No worries though, where there is a will (with options) there is a way.

Hi

I've tried almost anything here... I'm using an online SQL SERVER database with ASPProtect 7, and I can't login after my initial creation of the admin account.

It works fine with Access... I believe I have checked all the fields created by the sql statement (which was run with no errors),

What could be the problem here? could it be a problem that I run my local IIS against the online sql server?

sincerely,

Morten

I will actually explain how to set access_levels and/or groups...

in "users/add_new_account.asp"

ASPProtect protects ".asp" pages only.

That is your problem.

Has any one used the aspmail function to send emails from within your site? If so what did you use as the AspMail_Host string in the connections database?

thank you

How to set a new users expiration date.

You'll need to edit the "users/add_new_account.asp" with a text editor.

Find this section..

<%
CmdAddUser.Fields("ValidateEmailCode") = ValidateEmailCode
CmdAddUser.Fields("Access_Level") = ""
' PUT YOUR CODE HERE
CmdAdduser.Update
ID = CmdAdduser("ID")
CmdAdduser.Close
Set CmdAdduser = Nothing
ConnPasswords.Close
Set ConnPasswords = Nothing
%>

You'll want to add code like this right between the Acccess_Level  and Updates section

CmdAddUser.Fields("Expiration_Date") = Date + 60

That will give take todays date and add 60 days to it.
You can of course do whatever you want here.

Actually, any database value for the user can be set during registration.

You can also change the default Access_Level to whatever you like.

Okay, thanks, I'm going to change the method tonight and see if it makes a difference

I'll report back

Dave

Chris -

Sorry, I am looking at your code on view_item.asp and I have noticed that you are calling 3 variable; start_date, end_date, and image_url that do not exist in the databases that you provided.  Do I have the updated package for ASPVendor?

I dont understand why I would get an error? -- I'm not sending the email from internal - so why would it try to validate?

I'm trying to send an email to an independent place - just like I would send an email to you

Am I using the wrong email setting - should I be doing something other than using "remote server"

I encountered a problem that I haven't been able to solve. I'm trying to get .pdf files to byte serve (page-by-page load in the browser) but unable to do so. I've narrowed it down to stream download file where it creates the header object. I haven't made any success with the changes I've tried. Any help would be very nice.

This maybe useful:
http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/act/htm/actml_ref_href.asp

I made the changes like you suggested, but now the page just times out before even loading. 

<%
ConnectionString = "DBQ=D:\clients\rklarman\DrWeisbergUsers.mdb;Driver={Microso ft Access Driver (*.mdb)}"
DatabaseType = "MSACCESS"
%>

ok, PM me some additional info so I can go look around.

I dont quite understand everything going on.

Let me know what to do exactly to be successful logging in and also...

Let me know what to do exactly to reproduce the issue and I will tell you what I think.

More Upgrade Info

To upgrade an existing ASPBanner system please follow these steps.

Back up your old system completely before starting.

Install the new system per the installation instructions that came with it.

Once it is running simply use your old ASPBanner database with the new system.

You may also want to keep your banner images folder from before in the same location so your existing banners still link to valid image urls because the new system stores banner images in a new location.

Since the config table in the database is no longer used you will need to go to the settings screen of aspbanner again and configure things. The config table in your old database can be deleted or left alone. It won't be used anymore so it does not matter either way.

That is all there is to it. If you have any issues please ask in the forums and we will help you out.

ok, I just sent you a private message with download information.

replace you existing

"check_user_inc.asp"

"admin/check_admin_inc.asp"

"admin/email_user.asp"

with the new versions in the download

Do some testing to make sure that HANNAH password works ok for you.

Hopefully this cures the issue...
If it works ok for you for a while I will offer the fixes to everyone and start using this code from now on

BTW:
"admin/email_user.asp" had an unrelated bug in it that only happened if its error handling got triggered... it was posting back to the wrong page when that happened and causing an error

Great Thank you!

As of thus far the program is working rather nicely.

I am very impressed :)

The version of aspbanner you have should not matter.

What you are doing here is wrong.

<PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">

PARAM NAME=movie is supposed to link to your ".swf" file.
And thats why all you see is black.

I don't think you quite understood all of that information fully.

Your ".swf" files needs to be coded in FLASH to link to the aspbanner redirect url. You don't change that flash calling code like that.

The ".swf" file links to the aspbanner redirect url which tracks the click and then redirects the user to the Link URL

You basically need to code your ".swf" flash file to go to that aspbanner URL or code your flash file so it can take a parameter for the url it clicks to (like the macromedia article talks about. This has to be done when editing the flash file in the flash editor before the file is saved.

If you dont have access to the original ".swf" to edit it and re-save it.. your out of luck as far as tracking clicks goes

It's seems to work fine after renaming the file, rebuilding the application, and editing the web.config file to point to login.aspx. It looks like I can use your fine product and thanks again for the help. It was unusually easy. Merry Christmas…

Hello,

I do not really understand what you mean?
There are no country and city lists in ASPClassifieds.

5300 users honetly wouldn't even phase the database or the code... even with MSAccess...you got other problems and I can say that with 150% certainty

my guess is permissions on the database folder are not quite right or the odbc drivers have issues.. something along those lines..

access databases act up when full modify permissions are not given to the folder they are in.... they can also act up if the odbc drivers are very new and you are not using a newer version of the access database such as 2002 version as opposed to a 97 or 2000 version

using a system dsn as opposed to a dsn-less connection can also cause BIG issues. always use a DSN-LESS connection

you can also have big problems if just the database file is given permissions instead of the whole directory it is in

also, the script timeout has nothing to do with it.. if that is happening something is wrong with the data connection like I said... no amount of changing timeouts is going to cure it...

how permissions are correctly set
http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

why system dsn's with access databases are bad news
http://support.cjwsoft.com/code/moreinfo9-1.htm

I know it worked at 1st but it can still be related to all of this because when permissions are not perfect databases will work ok for a while and then act up. it all has to do with the temporay lock files that access creates and deletes on a regualr basis

Hi Chris,

The hosting company has been doing some work apparently regarding the database connection issue. Still something is funky

When I type in www.vickerylightning.com/aspgallery/default.asp I get the custom 404 error page and I noticed that it is trying to open the following:

http://www.vickerylightning.com/skins/default/settings.asp

Is that what it is supposed to do?

Thanks!
Rhona, the rookie

I am running .asp pages and using the longer code method to display flash banners on my site.

I have noticed a considerable decrease in the loading of my index page when I have a banner called.  When I remove the banner, all is fine.

Any suggestions?

Dave

Hi Chris,

The password is HANNAH.  If you're into trouble shooting mode and would like the key, I can send it to you.  If not, no big deal, I've email the guy a new password.  We'll see how many rounds it takes him to get it right. 

Thanks,
Mick

Hi,

Its just not enough information to go on. I need more details on what is going on. There are a lot of configuration settings in these applications. I really do not know what to make of that screen shot.

My 1st guess is that if you cannot delete a picture that the picture folder does not have delete permissions ??

I also need to mention that I am not sure what this has to do with ASPImage ?

More Info in Case Anyone is Interested:

This bug was mentioned by a couple people. The cause of it was never really understood until I recently re-wrote some of the banner code for an upcoming version.

The fix for this bug was very simple. It was just one of those weird situations where code should have worked but did not. I added some code to do it a bit differently and it worked as it should have..

It really still makes no sense to me why it didnt work the way it was, but at least there is a fix.

Hi, I am glad you like the system.
Thx for the comments..

The banner logic in aspbanner it tweaked for speed and performance.. that sort of thing really wouldn't fit into the current code structure very well. It would slow things down and be a nightmare to code because of the way aspbanner uses ultra fast application variables for the banner rotation. Basically its a feature I didnt incorporate for performance and pricing reasons.

I would suggest making different zones for different conditions.. then surrounding the banner calling code with if else logic so a different baner zone was called under certain conditions.

That way performance would not be effected and you could actually show a different group of banners based on certain conditions.

Sorry, but that is the best advice I can offer at this time.

I built ASPBanner for performance and at this time I refuse to sacrifice that for any feature that will slow it down and consume more resources.