I had both ASP Listings & Classified on the same website.  The categories seem to be getting mixed up. I removed ASP Classified but classfieds categories is still appearing in the student of ASP Listing.

How do I fix this?

Thanks

I checked through the code and could not find anything as well. 

However, I do think it may be related somehow to the code as I get the messages popping up in the error log only after I have edited a banner.

If there is nothing obvious, I may just set my error log to filter and automatically delete this type of error.  Not something I prefer to do.

Thanks for the quick response.

Otherwise the program is working very well and I'm happy with it.

There are 8 Access Levels by default.. they work like this.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=166& ; ; ;PN=1

Access Levels exist in ASPProtect Version 7 for backward compatibilty for customers using previous versions.

Truth is Groups are the replacement for Access Levels and they are much more powerful and flexible. You can also make as many of them as you want in the admin area.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=167& ; ; ;PN=1

On a side note:
We also coded ASPProtect Version 7 so there could technically be as many access levels as you wanted. It's not supported but if you really wanted more Access Levels you would carefully add more Access Levels to the drop down choices when you edit a user. "edit.asp"

I don't know why anyone would want to use Access Levels however when they can use Groups.

UPDATE..

Installed a new rack mount 1u server this week.

3.2 ghz hyperthreading 1 mb l2 cache prescott cpu
2 gb pf pc3200 kingston memory
SATA Raid.. (2) 120 gb drives running hardware raid 1

It is a supermicro 1u server case and server motherboard.
The hard drives are SATA 150 120 gb 7200 rpm Diamondmax Maxtors

All high end server type stuff... It's a very powerful server and has been running great all week. 500+ hours uptime so far.

Running Windows 2003 Server Enterprise
SQL 2000 Enterprise SP3
SmarterMail
SmarterStats
Windows DNS
ZipEnable (which I am reviewing for them)
ServerMask (which I am reviewing for them)
A ton of ASP Components which I have purchased over the years.

So that means I can now focus my attention on creating software again instead of being a system admin. (Due to these server issues over the past few months I am now back to godly status as far as windows system administration goes.. not to mention I am now back up to speed on the latest processors and hardware)

So, getting back to ASP Photo Gallery...

I spent about 20 more hours this week on the new version of ASP Photo Gallery Pro.. I have another 40 or more to put into it as I have a lot I want to do.

I think it will be ready within the next three weeks. I know a lot of you have been waiting for something.

Hello Chris:

Yes I'm using the Option Pack.

-Ricardo

Chris,

I understand.  I set it to a lower number that will hopefully be a good balance for the user.  I am simply AMAZED at what your software does and I thank you for all you have done.

Jess

If you need to know how to enable them on your test server.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&P N=1

Below is the email I received when testing the self-registration. Does anyone know what setting I configured incorrectly?

I received the email to confirm the registration but the link to activate is invalied.

Thanks!

Your registration still has to be validated.
Go to
?u=bubbaj&v=4579
to verify your registration.

Chris,

Another question on V7.  I set up all the paths as required for the extras like user pics and exports on my site.  They were working fine.  I created an export, then as you recommend, deleted the file on the site to ensure it doesn't get in the wrong hands.  I did this a few times to test it after a number of people logged in.

About 2 days later, I went to do it again and the system came back with an error saying the directory didn't exist.  I know it did because I created it and it worked fine.  I then created the directory again thinking I was losing it.

Then today, I went to do another export and the directory is gone again!  Can you help me understand why this might be happening?  I am the only one with FTP access to the site so there is no way that it could be someone else doing it.  The error I get is:

Microsoft VBScript runtime error '800a004c'

Path not found

/password_admin/export.asp, line 78

Thanks,
Dave

I am using cdont to send email. what do i have to do send email to other display my full name instead  of email address. In other word I want to see first name last name  in their email client instead of email address.

thanks for your help

Our login works great, variables even help determine menu options.  When user logs on, however, it opens in a new page.  Is there a setting somewhere that sets whether you can open in a new or existing page?

Also, when you log off

As an update to this thread I fixed the "upload_post.asp" page quite some time ago but forgot to post the updated file here.

So here it is.

2005-09-16_165913_upload_post.zip

Hi,

Could you please advise what may be causing this error:

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x57a4 Thread 0x5474 DBC 0xf03a704 Jet'.

/ASPProtect/check_user_inc.asp, line 292

Funny thing is that if I refesh the page with the above error it gives me the following eror:

/ASPProtect/check_user_inc.asp, line 292

and after few times of refreshing the page it shows me the page I am after.

Is this my promlem or ISP's.

Thank you

question 2 is answered best here

http://support.cjwsoft.com/code/code_info.asp?TID=319&KW =paypal

I should also mention that the paypal scenarios used in ASPProtect can not be tested using PayPal's sandbox. Also test using two real PayPal accounts and on a live setup. (You'll allowed two paypal accounts)

then you can log into the other and refund the transctions and of course it makes sense to use low amount like 1 cent and what not.

Also, I'd love to see what you came up with with the integration. I have been working on it here as well and took it in a different direction as I plan to sell directions for it as an add-on for aspprotect. I have it all working here but so far I dont see an easy way to let other people do it as I had to change things in both systems in a lot of places. Utimately if done under a SQL environment triggers should be used at the database level and that is another consideration.

The ASPProtect v7.x Documentation is now available as a download in windows ".chm" format. (needs to be viewed on a windows based machine that can read it) If you are using XP with Service Pack 2 follow the instructions below or you will not be able to view the help file.

Download Documentation

You should save this file and then open it.
Just opening it from download may not work and you will not be able to read it correctly.

Please continue to check the support forum threads for the most up to date documentation.


IMPORTANT
If your are using xp with service pack 2 there are some new security features that can block the access of help files you download. So as far as the ".chm" file goes.. you have to download it... right click on it...go to properties... then  choose unblock down in the lower right corner ...then you can open and view the file correctly

how di I change the currency dollar sign to gdp pound sign ?

I need all my tranactions in gdp puund sterling to use on paypal

regards

simon

Excellent

Flash Code Generator

Until I have time to make one I suggest using the one on the banmanpro support site as it is pretty nice.

http://www.banmanpro.com/support/flashgenerator.asp

no, that only applies to random pictures and stats..

The issues you are talking about usually relate to issues created by switching back and forth between a local install and a live server install and not being careful about changing the paths in the settings depending on where you are running it from.

For example.. it trying to use a url at the server level that is only valid when you are running it locally

We do not support customization of the code or any custom coding you may end up doing with Visual Studio.NET. However, if you can show me that the application functions incorrectly in its default unmodified form I can help. If not it has to be something you did most likely.

Though I do not if it is the issue, mixing c# and vb.net in the same project can be tricky if not problematic. It’s definitely just not something I can support.

If you have not seen it we have tuturial on setting up the project in visual studio.net.
http://support.cjwsoft.com/code/moreinfo85-1.htm

I would suggest starting with a clean installation. Test everything to make sure the things you say are ok or not. (if not post here about it) Then try your hand at editing the application and compiling it. Keep the c# out of the mix at 1st.

I am not even sure if adding c# to the same project is feasable.
(maybe it is , maybe it isn't)

That being said.. ASPProtect.NET can of course be used to protect pages using c#. But compiling the ASPProtect.NET project with C# code added sounds a bit iffy to me. We wrote the application in VB.NET so you really need to use vb.net when making changes to it.

More Info on Simple File Sharing

http://www.practicallynetworked.com/sharing/xp/filesharing.h tm

http://www.theeldergeek.com/quick_guide_to_simple_file_shari ng.htm

http://support.microsoft.com/default.aspx?scid=kb;en-us;3040 40

humm, did you edit any of the registration code ?
this is not something anyone has ever mentioned and the aspprotect 6 code has not been changed in over a year ?

can I see where there is happening ?
I may need ftp or frontpage access to the server in order to troubleshoot unless you can provide me with more details here.

thx..

Good Morning, any suggestions on how to best "fake out the system" -- I would like to try to keep this clean so I can see the real errors?

My thought was to try to just move those .gif files to the directory that it thinks it should be in -- do you have any better suggestions? Or reasons why I really wouldnt want to do that?

The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.

banner_redirect.asp, line 36

Database - MS SQL Server.

I apologize if I've missed this, but I would love to see the ability to auto-e-mail the advertiser at some randomly set interval before the banner expires. Ideally, I would also be cc'd on this e-mail so I can stay in touch. If the advertiser wants to renew, I can receive payment and change the expiration date without their banner ever falling out of service.

Since e-mail is already built into the program, would it be difficult to add a routine that checks for expiring banners at some daily interval, and contacts the advertiser?

To get really fancy, the e-mail could include the ability for me to add a button for paypal, allowing the advertiser to easily click and send off another payment.

Best,

Wayne

I really need more information.

Connection strings being used ?
How have permissions for the database folder been set ?

etc etc  the more specific the better

You also may want to download ASPTest from our main site and see if you can get that running.

I would suspect your problem relates to the databases having a password set on them. Probably the ones you connected to didn't. It complicates setting up a connection correctly (especially a dsn) but there is a good reason for it as it adds a little extra security.

And of course my detailed article on the error.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=27& PN=1

really all depends on the sql connection string you are using and the names of your sql user you are using...

you really havent described very much..

I'd double check all of it.. something is wrong

We are emailing a weekly newsletter via the Newsletter feature.  Many clients complain that they are not receiving the newsletter.  The emails are not bouncing back indicating that they possibly are not being sent to begin with. 

Is there any way we can determine if ASP is making it through the entire database of subscribers?

Ok, I started the database tables from scratch. I did everything using sql enterprise manager and query analizer..

Same thing happens... certain passwords just do not work.

So I did a lot of testing and I have come to the conclusion that this has something to do with the regional settings of that SQL server.

Here is an example.. see the screenshot below.

Username "admin" password "petepetepete"

The top query done in Enterprise Manager is valid and shows the user.

The bottom query is also valid but it does not show the user.

And that is exactly what is happening from the ASP codes point of view.

Now, this means that even though that encrypted password is getting saved to the databse correctly this particular SQL server just cant deal with it from a QUERY.

It works fine on two different SQL servers that I have. It's just got to be something regional related like unicode characters not being dealt with correctly or something odd like that.

I tried changing the collation data for the "Password" field type on that SQL server and it looks right. I don't know what else to do but it is something about that SQL server. There may be a way to change the regional setting through the connection string but I cant find any articles on that right now.

One solution I have for you to get this working there is to eliminate the encryption factor then I dont think you will have these issues.

It's either that or find another SQL server with US type settings or use MSAccess. ASPProtect runs nearly as fast on Access as long as you do not have over 10,000 users or whatever. The system hardly ever accesses the database so it performance under MSAccess is always good.

Let me know what you want to do. I can shows you how to eliminate the encrypytion factor if you want to try that. I think if I make you a custom version of the RC4 function you can just replace that and then the system will use plain passwords.

Your call..

Not sure because of the nature of the javascript method

for starters tighten up the html around the banner call

change

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<!------- ASPBanner Ad code ------------->
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >

</td>

to

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >
</td>

If that doesn't help I would suggest using the ASP 3.0 version of ASPBanner. It can serve banners to a any type of page extension and it runs just as well as the .NET version. There is a new iframe method for calling banners that you can try instead of the javascript. The iframe method is explained in the ASPBanner Unlimited section of the forum.